49 lbs. @ 120 rpm Dynamic Radial Load Capacity Bearings

Filter by

System of Measurement

Shaft Diameter

Length

Plain Bearing Type

Bearing Type

For Load Direction

Material

DFARS Compliance

Dynamic Radial Load Capacity @ Speed

For Housing ID

Lubrication

Maximum Temperature

Minimum Temperature

REACH Compliance

RoHS Compliance

Shaft Mount Type

Shaft Type

Lubricant

Lubrication Method

Dynamic Thrust Load Capacity @ Speed

Flange OD

Forward

How can we improve?

6 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 4 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
7	4	49 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
8	4	49 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 4mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
8	4	49 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 4mm Shaft Dia.
5.2mm	4mm	7mm	0.6mm	49 lbs. @ 120 rpm	80 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	000000
8mm	4mm	12mm	2mm	49 lbs. @ 120 rpm	310 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	10° to 220°	00000000	0000

Light Duty Dry-Running Flanged Sleeve Bearings

Use where high loads and speeds are not required.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Nylon Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Color	Temperature Range, °F		Each
For 5mm Shaft Dia.
8mm	16mm	11mm	1.5mm	49 lbs. @ 120 rpm	25 lbs. @ 120 rpm	White	-20° to 210°	00000000	00000