About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 30 mm Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 40 | 60 | 5,550 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Multipurpose Dry-Running Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
For 1 3/4" Shaft Dia. | ||||||
|---|---|---|---|---|---|---|
| 2" | 1 3/4" | 5,550 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 30mm Shaft Dia. | ||||||
| 40mm | 30mm | 5,550 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/8" Shaft Dia. | ||||||||||
| 1 3/8" | 1 1/4" | 1 3/4" | 1/8" | 5,550 lbs. @ 30 rpm | 3,550 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||||||
| 1 1/2" | 1 1/4" | 1 3/4" | 3/16" | 5,550 lbs. @ 30 rpm | 3,000 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 2" Shaft Dia. | ||||||||||
| 2 1/4" | 1 1/4" | 2 1/2" | 1/8" | 5,550 lbs. @ 30 rpm | 3,100 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 3/4" Shaft Dia. | |||||||||
| 2" | 1 3/4" | 2 1/4" | 1/4" | 5,550 lbs. @ 30 rpm | 2,200 lbs. @ 30 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 28mm Shaft Dia. | ||||||||||
| 36mm | 32mm | 44mm | 4mm | 5,550 lbs. @ 30 rpm | 5,600 lbs. @ 30 rpm | Required | -350° to 450° | __ | 00000000 | 000000 |
For 30mm Shaft Dia. | ||||||||||
| 38mm | 30mm | 46mm | 4mm | 5,550 lbs. @ 30 rpm | 5,900 lbs. @ 30 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |