About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 32mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
40mm | 32mm | 5,600 lbs. @ 30 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1 3/4" Shaft Dia. | ||||||
2" | 2" | 5,600 lbs. @ 30 rpm | Embedded | -50° to 700° | 00000000 | 000000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 32mm Shaft Dia. | ||||||||||
38mm | 32mm | 46mm | 4mm | 5,600 lbs. @ 30 rpm | 3,250 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 000000 |
For 35mm Shaft Dia. | ||||||||||
40mm | 32mm | 45mm | 2.5mm | 5,600 lbs. @ 30 rpm | 2,400 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
For 45mm Shaft Dia. | ||||||||||
51mm | 32mm | 57mm | 3mm | 5,600 lbs. @ 30 rpm | 2,950 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
For 50mm Shaft Dia. | ||||||||||
60mm | 32mm | 70mm | 5mm | 5,600 lbs. @ 30 rpm | 4,700 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
32 mm Shaft Dia. | ||||||||||
38 | 32 | 46 | 4 | 5,600 lbs. @ 30 rpm | 3,250 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 000000 |
35 mm Shaft Dia. | ||||||||||
40 | 32 | 45 | 2.5 | 5,600 lbs. @ 30 rpm | 2,400 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
45 mm Shaft Dia. | ||||||||||
51 | 32 | 57 | 3 | 5,600 lbs. @ 30 rpm | 2,950 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
50 mm Shaft Dia. | ||||||||||
60 | 32 | 70 | 5 | 5,600 lbs. @ 30 rpm | 4,700 lbs. @ 30 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1 1/8" Shaft Dia. | |||||||||
1 3/8" | 1 1/4" | 1 3/4" | 1/8" | 5,600 lbs. @ 30 rpm | 5,600 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 1 1/4" Shaft Dia. | |||||||||
1 1/2" | 1" | 1 3/4" | 3/16" | 5,600 lbs. @ 30 rpm | 5,300 lbs. @ 30 rpm | Required | -350° to 500° | 0000000 | 000000 |