About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
16 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
18 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
20 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/168/1688k16p1-d03c-digitall@halfx_637051672182538562.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
16 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
18 | 20 | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/709/7095k46p1-d03c-digitall@halfx_637054254811407456.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 12mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
15mm | 20mm | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 00000 |
16mm | 20mm | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
18mm | 20mm | 740 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | 00000000 | 0000 |
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 6mm Shaft Dia. | ||||||
8mm | 20mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 000000 |
12mm | 20mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 10mm Shaft Dia. | ||||||
12mm | 12mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 12mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
16mm | 12mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | ||||||||||
14mm | 20mm | 16mm | 1mm | 740 lbs. @ 120 rpm | 270 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
15mm | 20mm | 18mm | 1.5mm | 740 lbs. @ 120 rpm | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
16mm | 20mm | 23mm | 3mm | 740 lbs. @ 120 rpm | 820 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
17mm | 20mm | 22mm | 2.5mm | 740 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
18mm | 20mm | 24mm | 3mm | 740 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/167/1677k9--4831a7b90d81610475231-p9@halfx_637460504502675306.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | ||||||||||
15mm | 20mm | 18mm | 1.5mm | 740 lbs. @ 120 rpm | 430 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
17mm | 20mm | 22mm | 2.5mm | 740 lbs. @ 120 rpm | 760 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
18mm | 20mm | 24mm | 3mm | 740 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3746k16c1-d03c-digital-master1569533447-p9@halfx_637051268441216763.png?ver=imagenotfound)
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||||||
18mm | 20mm | 24mm | 3mm | 740 lbs. @ 120 rpm | 880 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/296/2962t2--36c18249be01610556109-p9@halfx_637461313471637916.png?ver=imagenotfound)
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||
13mm | 12mm | 16mm | 1.5mm | 740 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | -350° to 450° | 00000000 | 000000 |
16mm | 12mm | 22mm | 3mm | 740 lbs. @ 120 rpm | 1,250 lbs. @ 120 rpm | -350° to 450° | 00000000 | 00000 |
Multipurpose Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/781/7815k31--165e839e8541610741365-p9@halfx_637463165782414248.png?ver=imagenotfound)
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||||
13mm | 12mm | 16mm | 1.5mm | 740 lbs. @ 120 rpm | 710 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
16mm | 12mm | 22mm | 3mm | 740 lbs. @ 120 rpm | 1,250 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 00000000 | 0000 |