870 lbs. @ 120 rpm Dynamic Radial Load Capacity Bearings

Filter by

Bearing Type

DFARS Compliance

System of Measurement

Dynamic Radial Load Capacity @ Speed

For Housing ID

For Load Direction

Length

Lubrication

Material

Maximum Temperature

Minimum Temperature

Plain Bearing Type

RoHS Compliance

Shaft Diameter

Shaft Mount Type

Shaft Type

Lubricant

Lubrication Method

REACH Compliance

Dynamic Thrust Load Capacity @ Speed

Flange OD

Forward

How can we improve?

22 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

841 Bronze Bearings

For 7/16" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
9/16"	1"	870 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	00000
5/8"	1"	870 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
For 1/2" Shaft Dia.
5/8"	7/8"	870 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
11/16"	7/8"	870 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000
3/4"	7/8"	870 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	00000000	0000

High-Load Oil-Embedded Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings

For 1/4" Shaft Dia.
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
3/8"	7/8"	870 lbs. @ 120 rpm	Lubricated	SAE 90 Oil	-15° to 300°	0000000	00000
For 12mm Shaft Dia.
15mm	20mm	870 lbs. @ 120 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	0000
16mm	20mm	870 lbs. @ 120 rpm	Lubricated	SAE 90 Oil	-15° to 300°	00000000	0000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 12 mm Shaft Dia.
15	20	870 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	00000

High-Load Food Industry Oil-Embedded Sleeve Bearings

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.

Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID	Length	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F	Specifications Met		Each
For 12mm Shaft Dia.
16mm	20mm	870 lbs. @ 120 rpm	Lubricated	SAE 20 Oil	-75° to 300°	ASTM B439, NSF Registered H1	00000000	00000

High-Temperature Dry-Running Sleeve Bearings

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.

932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings.

Grooved bearings have a graphite-filled groove on the inside of the bearing that distributes lubricant evenly along the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded

Grooved

841 Bearing Bronze
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication Method	Temperature Range, °F		Each
For 7/16" Shaft Dia.
9/16"	1 1/4"	870 lbs. @ 120 rpm	Embedded	-50° to 700°	00000000	00000
932 Bearing Bronze
For 1/2" Shaft Dia.
3/4"	1/2"	870 lbs. @ 120 rpm	Grooved	-350° to 450°	00000000	00000

Multipurpose Sleeve Bearings

These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

932 Bearing Bronze Bearings
For Housing ID	Lg.	Dynamic Radial Load Capacity	Lubrication	Temperature Range, °F		Each
For 1/4" Shaft Dia.
3/8"	7/8"	870 lbs. @ 120 rpm	Required	-350° to 450°	00000000	00000
For 7/16" Shaft Dia.
9/16"	1/2"	870 lbs. @ 120 rpm	Required	-350° to 450°	00000000	0000
5/8"	1/2"	870 lbs. @ 120 rpm	Required	-350° to 450°	00000000	0000

High-Load Oil-Embedded Flanged Sleeve Bearings

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 12mm Shaft Dia.
15mm	20mm	18mm	1.5mm	870 lbs. @ 120 rpm	340 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	00000
17mm	20mm	22mm	2.5mm	870 lbs. @ 120 rpm	530 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	0000
18mm	20mm	24mm	3mm	870 lbs. @ 120 rpm	610 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-15° to 300°	00000000	0000

High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper Bearings
For Housing ID, mm	Length, mm	Flange OD, mm	Flange Thickness, mm	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
12 mm Shaft Dia.
15	20	18	1.5	870 lbs. @ 120 rpm	340 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	00000
17	20	22	2.5	870 lbs. @ 120 rpm	530 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	00000
18	20	24	3	870 lbs. @ 120 rpm	620 lbs. @ 120 rpm	Lubricated	ISO 460 Oil	-60° to 300°	00000000	0000

Multipurpose Flanged Sleeve Bearings

These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

932 Bearing Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Temperature Range, °F	PV Max.		Each
For 7/16" Shaft Dia.
9/16"	1/2"	11/16"	1/16"	870 lbs. @ 120 rpm	760 lbs. @ 120 rpm	Required	-350° to 450°	75,000	0000000	00000