About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/4" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 13/16" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 7/8" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 15/16" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
| 1" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
| 7/8" | 5/8" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 1" | 5/8" | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 15 mm Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 19 | 20 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
| 20 | 20 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 21 | 20 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
| 22 | 20 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 20 mm Shaft Dia. | |||||||
| 25 | 15 | 930 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 5/8" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 3/4" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 0000000 | 00000 |
| 7/8" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
| 1" | 3/4" | 930 lbs. @ 60 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 0000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 3/4" | 3/4" | 15/16" | 1/16" | 930 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 3/4" | 3/4" | 15/16" | 1/8" | 930 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 3/4" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 13/16" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 930 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||
| 1" | 5/8" | 1 1/4" | 3/16" | 930 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Metric 841 Bronze Bearings | ||||||||||
For 15mm Shaft Dia. | ||||||||||
| 19mm | 20mm | 23mm | 2mm | 930 lbs. @ 60 rpm | 740 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
| 21mm | 20mm | 27mm | 3mm | 930 lbs. @ 60 rpm | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
For 20mm Shaft Dia. | ||||||||||
| 26mm | 15mm | 32mm | 3mm | 930 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
| 3/4" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
| 13/16" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
| 7/8" | 3/4" | 1 1/8" | 1/8" | 930 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||
| 1" | 5/8" | 1 1/4" | 3/16" | 930 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||||
| 3/4" | 3/4" | 1" | 1/8" | 930 lbs. @ 60 rpm | 950 lbs. @ 60 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||||
| 1" | 5/8" | 1 1/4" | 3/16" | 930 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 100 Oil | -75° to 300° | NSF Registered H1 | 0000000 | 0000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 15mm | 19mm | 39.5mm | 82.5mm | 19.5mm | 19.4mm | 9mm | 63.5mm | 930 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |