About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 50 mm Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 60 | 60 | 9,300 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
|---|---|---|---|---|---|---|
For 30mm Shaft Dia. | ||||||
| 40mm | 50mm | 9,300 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 50mm Shaft Dia. | ||||||||||
| 56mm | 30mm | 62mm | 3mm | 9,300 lbs. @ 30 rpm | 6,400 lbs. @ 30 rpm | Required | -350° to 450° | 75,000 | 0000000 | 000000 |