About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1 3/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 2" | 2 3/4" | 9,600 lbs. @ 30 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 0000000 | 000000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID, mm | Length, mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper | |||||||
|---|---|---|---|---|---|---|---|
For 45 mm Shaft Dia. | |||||||
| 55 | 55 | 9,600 lbs. @ 30 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 000000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
