A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.

Open bearings dissipate heat more efficiently than shielded bearings.

For technical drawings and 3-D models, click on a part number.

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.

For technical drawings and 3-D models, click on a part number.

The flange ensures proper positioning inside a tube or housing.

440C stainless steel bearings are more corrosion resistant than steel bearings.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Bearings with extended inner ring provide additional shaft support.

For technical drawings and 3-D models, click on a part number.

No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment. The flange ensures proper positioning inside a tube or housing.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings. All are 440C stainless steel for good corrosion resistance. The flange ensures proper positioning inside a tube or housing.

Open bearings dissipate heat more efficiently than shielded bearings.

For technical drawings and 3-D models, click on a part number.

Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. Shields keep out dust and contaminants. Not for use in plastic panels.

For technical drawings and 3-D models, click on a part number.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Shielded bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants from one side.

Shielded bearings are protected from dust and contaminants on both sides.

For technical drawings and 3-D models, click on a part number.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.

For technical drawings and 3-D models, click on a part number.