About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003 | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 28,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
16002 | 15mm | 32mm | 8mm | Steel | 1,300 | 640 | 33,500 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003-2Z | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 22,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
6200-2Z | 10mm | 30mm | 9mm | Steel | 1,300 | 580 | 26,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |
16002-2Z | 15mm | 32mm | 8mm | Steel | 1,300 | 640 | 33,500 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6003-2RS | 17mm | 35mm | 10mm | Steel | 1,300 | 730 | 11,800 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 000000 |
6200-2RS | 10mm | 30mm | 9mm | Steel | 1,300 | 580 | 16,100 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 0000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
R10 | 5/8" | 1 3/8" | 9/32" | Steel | 1,300 | 730 | 12,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
R10-2RS | 5/8" | 1 3/8" | 11/32" | Steel | 1,300 | 730 | 12,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6002-2Z | 15 | 32 | 9 | Steel | 1,300 | 640 | 26,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
Sealed | ||||||||||||
6002-2RS | 15 | 32 | 9 | Steel | 1,300 | 640 | 14,000 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 00000 |
Light Duty Ball Bearings
Use these bearings where high speed and precision are not a concern.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
__ | 1/2" | 1 1/2" | 7/16" | Steel | 1,300 | 340 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 000000 |
__ | 5/8" | 1 1/2" | 7/16" | Steel | 1,300 | 340 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3030 | 3/4" | 1 5/8" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Shielded | ||||||||||||
3028-2Z | 5/8" | 1 5/8" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3030-2Z | 3/4" | 1 5/8" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3033-2Z | 5/8" | 1 3/4" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3035-2Z | 3/4" | 1 3/4" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Sealed | ||||||||||||
3028-2RS | 5/8" | 1 5/8" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3030-2RS | 3/4" | 1 5/8" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3035-2RS | 3/4" | 1 3/4" | 1/2" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Electrically Insulated Ball Bearings
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing. The ceramic balls generate less heat than steel balls, so they require lubrication less frequently.
Sealed bearings block out dust and other contaminants better than open and shielded bearings but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6002-2RS | 15 | 32 | 9 | Steel | 1,300 | 640 | 24,000 | Lubricated | -40° to 210° | ABEC-1 | 0000000 | 0000000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6202 | 15 | 35 | 11 | 440C Stainless Steel | 1,300 | 770 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
6202-2RS | 15 | 35 | 11 | 440C Stainless Steel | 1,300 | 770 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
6905-2RS | 25 | 42 | 9 | 440C Stainless Steel | 1,300 | 810 | 9,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Flanged Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
1/2" | 1 1/2" | 5/8" | 1.625" | 0.06" | 0.953" | 0.688" | Steel | 1,300 | 340 | 1,200 | Lubricated | -20° to 250° | Not Rated | 00000000 | 000000 |
5/8" | 1 1/2" | 7/16" | 1.625" | 0.06" | 0.953" | 0.484" | Steel | 1,300 | 340 | 1,200 | Lubricated | -20° to 250° | Not Rated | 00000000 | 00000 |
with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
3/4" | 1 5/8" | 1/2" | 1.75" | 0.06" | 0.906" | 0.562" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 00000000 | 000000 |
3/4" | 1 3/4" | 1/2" | 1.875" | 0.06" | 0.984" | 0.562" | Steel | 1,300 | 1,000 | 2,500 | Lubricated | -20° to 250° | Not Rated | 00000000 | 00000 |
Tapered-Roller Bearings
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
11/16" | 1 37/64" | 0.42" | LM11749/LM11710 | 1,300 | 5,250 | 650 | 4,350 | 5,500 | Required | -60° to 200° | 0000000 | 000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
5/16" | 1/2" | 9/16" | Steel | 1,300 | 1,480 | 29,000 | Required | 8 | -20° to 280° | DIN 281, ISO 76 | 00000000 | 00000 |
3/8" | 9/16" | 1/2" | Steel | 1,300 | 1,450 | 25,000 | Required | 8 | -40° to 280° | __ | 0000000 | 0000 |
Sealed—One Side | ||||||||||||
3/8" | 9/16" | 9/16" | Steel | 1,300 | 1,450 | 15,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
Sealed—Both Sides | ||||||||||||
3/8" | 9/16" | 5/8" | Steel | 1,300 | 1,450 | 15,000 | Lubricated | 8 | -20° to 210° | __ | 00000000 | 00000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Track lubricators reduce friction and wear without shutting down equipment. Oil-infused resin distributes lubricant onto rollers, which transfer it to your track.
For technical drawings and 3-D models, click on a part number.
Track Rollers | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | Roller-Mount Track Lubricators | ||||||||||||
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | Each | ||
Black-Oxide Steel Crowned Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 11 | 0.6 | 13,000 | 500 | 1,300 | 250° | Needle Roller | 00000000 | 0000000 | 0000000 | 000000 |
Threaded Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.
Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Ht. Adjustment Capability, mm | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 0000000 |
Steel Crowned Rollers with Seal | |||||||||||||||||
16 | 11 | 6 | 16 | M6 | 1 | 9 | 9 | 7 | 0.5 | 13,000 | 520 | 1,300 | 250° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Thrust-Load-Rated Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,700 | 1,300 | 910 | 325° | Ball | Mounting Hardware | 0000000 | 0000000 |
2 1/2" | 1 5/8" | 1" | 2 1/4" | 1"-14 | 1 1/2" | 1 1/4" | 1/16" | 6,000 | 1,700 | 1,300 | 910 | 325° | Ball | Mounting Hardware | 0000000 | 000000 |
Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
440C stainless steel rollers are harder and more wear resistant than 303 stainless steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Hex Stud End Drive | ||||||||||||||||
2" | 1 5/8" | 7/8" | 2" | 7/8"-14 | 1 1/8" | 1" | 1/16" | 6,000 | 1,500 | 1,300 | 1,000 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||
1 13/16" | 5/8" | 12mm | 5/8" | 5/16" | 3/16" | 2,200 | 1,300 | 1,300 | 380 | 210° | Ball | Single Sealed and Shielded | 0000000 | 000000 |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||
1 13/16" | 5/8" | 12mm | 5/8" | 5/16" | 3/16" | 2,200 | 1,300 | 1,300 | 380 | 210° | Ball | Single Sealed and Shielded | 0000000 | 000000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||||
46 | 16 | 12 | 15 | M12 | 1.75 | 15 | 5.6 | 19.05 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 245° | Ball | __ | 0000000 | 000000 |
46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 3.4 | 19 | 8 | 4 | 2,200 | 1,300 | 1,300 | 350 | 210° | Ball | Mounting Hardware | 0000000 | 00000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
46 | 16 | 11 | 15 | M10 | 1.5 | 11 | 5.7 | 19.05 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 245° | Mounting Hardware | 0000000 | 000000 |
46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 3.4 | 19 | 8 | 4 | 2,200 | 1,300 | 1,300 | 350 | 210° | Mounting Hardware | 0000000 | 00000 |
Sanitary Shaft-Mount V-Groove Track Rollers
Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends. They’re permanently lubricated to prevent contamination, with sealed and shielded bearings blocking out debris and liquids to protect the lubricant. FDA compliant and NSF registered H1, the lubricant is safe for incidental contact with food. These track rollers are made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Capacity, lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Diameter | Width | For Shaft Diameter | Overall Width | Width | Depth | Maximum Speed, rpm | Static | Dynamic | Static Thrust Load Capacity, lbs. | Maximum Temperature, °F | Bearing Type | Specifications Met | Each | |
440C Stainless Steel V-Groove Rollers With Seal | ||||||||||||||
Single-Sealed and Shielded | ||||||||||||||
1 13/16" | 5/8" | 15/32" | 5/8" | 5/16" | 5/16" | 2,200 | 1,300 | 1,300 | 380 | 175° | Ball | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 0000000 | 0000000 |
Sanitary Threaded V-Groove Track Rollers
Guide loads along angle rail tracks in food and pharmaceutical plants or other sanitary environments with these threaded rollers. They’re permanently lubricated, a feature often seen in sanitary areas where repeated lubrication could cause contamination. Their lubricant is NSF registered H1 as safe for incidental contact with food. They’re made of stainless steel, so they won’t corrode from frequent washdowns with harsh cleaners. The bearings are sealed and shielded to keep out liquid and make sure the lubricant stays intact. These rollers have a V-groove profile, which allows debris to fall off when they’re mounted on angle rails. They’re also known as cam followers.
Rollers with a standard shoulder have a threaded mounting stud. Thread them directly into a component, or secure them with a nut for through-hole mounting.
Rollers with an adjustable shoulder are also known as eccentric track rollers. They can be moved up and down, and they’re commonly used alongside standard rollers to correct misalignment. Secure them with a nut for through-hole mounting.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Groove, mm | Radial Load Cap., lbs. | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Shoulder Lg., mm | Hex Shoulder Wd., mm | Ht. Adjustment Capability, mm | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Single-Sealed 440C Stainless Steel V-Groove Rollers | ||||||||||||||||||||
Standard Shoulder | ||||||||||||||||||||
46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 4.1 | 19 | 1.5 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 175° | Ball | Mounting Hardware | 0000000 | 0000000 |
Adjustable Shoulder | ||||||||||||||||||||
46 | 16 | 12 | 30 | M12 | 1.75 | 18 | 4.1 | 19 | 1.5 | 8 | 4 | 2,200 | 1,300 | 1,300 | 380 | 175° | Ball | Mounting Hardware | 0000000 | 000000 |