1,500 lbs. Dynamic Radial Load Capacity Bearings

Filter by

System of Measurement

Shaft Diameter

Width

For Housing ID

DFARS Compliance

Dynamic Radial Load Capacity

For Load Direction

Lubrication

Maximum Temperature

RoHS Compliance

Static Radial Load Capacity

Shaft Mount Type

Bearing Construction

Minimum Temperature

Shaft Type

Roller Bearing Type

Bearing Seal Type

Bearing Type

Cage Material

Ring Material

Roller Material

Forward

How can we improve?

20 Products

About Track Rollers

Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.

About Ball and Roller Bearings

Stainless Steel Ball Bearings

Bearings are 440C stainless steel for good corrosion resistance.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

For technical drawings and 3-D models, click on a part number.

Shielded

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating		Each
6300-2Z	10mm	35mm	11mm	440C Stainless Steel	1,500	610	23,000	Lubricated	-40° to 240°	ABEC-1	00000000	000000

Food Industry Permanently Lubricated Stainless Steel Ball Bearings

Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.

Sealed bearings have even better resistance to dust and contaminants than open bearings.

For technical drawings and 3-D models, click on a part number.

Inch Bearings

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
Open
R12	3/4"	1 5/8"	5/16"	440C Stainless Steel	1,500	800	10,000	Lubricated	-40° to 200°	ABEC-1	FDA Compliant 21 CFR 178.3570	000000	000000

Metric Bearings

					Radial Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Temp. Range, °F	ABEC Rating	Specifications Met		Each
Sealed
6300-2RS	10	35	11	440C Stainless Steel	1,500	610	13,000	Lubricated	-40° to 200°	ABEC-1	FDA Compliant 21 CFR 178.3570	00000000	000000

Needle-Roller Bearings

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.

Open bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

				Radial Load Cap., lbs.
For Shaft Dia.	For Housing ID	Wd.	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	For Shaft Surface Smoothness (Ra), microinch	Temp. Range, °F	Specifications Met		Each
Open
10mm	14mm	15mm	Steel	1,500	1,950	24,300	Required	8	-20° to 280°	DIN 618, ISO 3245	00000000	00000
13mm	19mm	12mm	Steel	1,500	1,750	18,700	Required	8	-20° to 280°	DIN 618, ISO 3245	00000000	0000

Threaded Track Rollers

Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

Rollers with seal have end seals to protect rolling elements from dirt and contamination.

Track lubricators reduce friction and wear without shutting down equipment. Oil-infused resin distributes lubricant onto rollers, which transfer it to your track.

For technical drawings and 3-D models, click on a part number.

Metric

Track Rollers
Roller, mm		Stud, mm		Thread			Shoulder, mm			Radial Load Cap., lbs.							Roller-Mount Track Lubricators
Dia.	Wd.	Dia.	Lg.	Size	Pitch, mm	Lg., mm	Dia.	Lg.	Max. Speed, rpm	Static	Dynamic	Max. Temp., °F	Bearing Type	Includes		Each		Each
Black-Oxide Steel Flat Rollers without Seal
19	11	8	20	M8	1.25	11	13	0.6	10,500	1,100	1,500	250°	Needle Roller	__	00000000	0000000	0000000	000000
30	14	12	25	M12	1.5	14	19	0.6	9,600	1,800	1,500	250°	Needle Roller	__	00000000	000000	0000000	00000
Black-Oxide Steel Flat Rollers with Seal
19	11	8	20	M8	1.25	11	13	0.6	10,500	1,100	1,500	250°	Needle Roller	__	00000000	000000	0000000	00000
32	14	12	25	M12	1.5	14	21	0.6	9,600	1,800	1,500	250°	Needle Roller	__	00000000	000000	000000	00
Black-Oxide Steel Crowned Rollers without Seal
30	14	12	25	M12	1.5	14	19	0.6	9,600	1,800	1,500	250°	Needle Roller	__	00000000	000000	0000000	00000
Black-Oxide Steel Crowned Rollers with Seal
19	11	8	20	M8	1.25	11	13	0.6	10,500	1,100	1,500	250°	Needle Roller	__	00000000	000000	0000000	00000
Steel Flat Rollers without Seal
16	11	6	16	M6	1	8	12	0.6	7,000	1,900	1,500	245°	Needle Roller	Mounting Hardware	0000000	00000	0000000	00000
Steel Flat Rollers with Seal
16	11	6	16	M6	1	8	12	0.6	7,000	1,900	1,500	175°	Needle Roller	Mounting Hardware	0000000	00000	0000000	00000

Threaded Track Rollers with Adjustable Shoulder

Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Secure the stud with a nut for through-hole mounting. All rollers have end seals to protect rolling elements from dirt and contamination.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

For technical drawings and 3-D models, click on a part number.

Metric

Roller, mm		Stud, mm		Thread			Shoulder, mm				Radial Load Cap., lbs.
Dia.	Wd.	Dia.	Lg.	Size	Pitch, mm	Lg., mm	Dia.	Lg.	Ht. Adjustment Capability, mm	Max. Speed, rpm	Static	Dynamic	Max. Temp., °F	Bearing Type	Includes		Each
Steel Flat Rollers with Seal
19	11	8	20	M8	1.25	11	11	9	0.5	10,000	1,100	1,500	250°	Needle Roller	Mounting Hardware	0000000	0000000
Steel Crowned Rollers with Seal
19	11	8	20	M8	1.25	11	11	9	0.5	10,000	1,100	1,500	250°	Needle Roller	Mounting Hardware	0000000	000000

Shaft-Mount Track Rollers

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Lubricate rollers through a hole and groove in the inner ring.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

Rollers with seal have end seals to protect rolling elements from dirt and contamination.

For technical drawings and 3-D models, click on a part number.

Metric

Roller, mm					Radial Load Cap., lbs.
Dia.	Wd.	For Shaft Dia., mm	Overall Wd., mm	Max. Speed, rpm	Static	Dynamic	Max. Temp., °F	Bearing Type	ID	ID Tolerance		Each
Black-Oxide Steel Crowned Rollers with Seal
30	14	10	15	5,500	1,900	1,500	210°	Needle Roller	10mm	-0.008mm to 0mm	0000000	000000
32	14	12	15	4,500	2,000	1,500	210°	Needle Roller	12mm	-0.008mm to 0mm	0000000	00000