About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6302 | 15mm | 42mm | 13mm | Steel | 2,650 | 1,150 | 25,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
62302-2RS | 15mm | 42mm | 17mm | Steel | 2,650 | 1,150 | 12,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6205 | 25mm | 52mm | 15mm | Steel | 2,650 | 1,550 | 7,700 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
6205-2RS | 25mm | 52mm | 15mm | Steel | 2,650 | 1,550 | 7,700 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6005-2Z | 25 | 47 | 12 | Steel | 2,650 | 1,450 | 16,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
6302-2Z | 15 | 42 | 13 | Steel | 2,650 | 1,200 | 19,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 00000 |
Sealed | ||||||||||||
6005-2RS | 25 | 47 | 12 | Steel | 2,650 | 1,450 | 9,500 | Lubricated | -20° to 210° | ABEC-3 | 0000000 | 00000 |
6302-2RS | 15 | 42 | 13 | Steel | 2,650 | 1,200 | 12,000 | Lubricated | -30° to 210° | ABEC-3 | 00000000 | 00000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6205-2RS | 25mm | 52mm | 15mm | 440C Stainless Steel | 2,650 | 1,550 | 13,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 000000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
6205-2RS | 25 | 52 | 15 | 440C Stainless Steel | 2,650 | 1,400 | 8,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
6909-2RS | 45 | 68 | 12 | 440C Stainless Steel | 2,650 | 1,950 | 5,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
65mm | 85mm | 10mm | 2,650 | 2,550 | Not Rated | Not Rated | Not Rated | Not Rated | 8,600 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 000000 |
Shielded | ||||||||||||||
65mm | 85mm | 10mm | 2,650 | 2,550 | Not Rated | Not Rated | Not Rated | Not Rated | 7,300 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
Food Industry Mounted Ball Bearings
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food. Bearings are self-aligning to compensate for shaft misalignment.
Stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Bearings | |||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Radial Load Cap., lbs. | Optional Covers | ||||||||||||||
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Lg. | Hole Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | Each | ||
Shielded 440 Stainless Steel Bearings with 400 Series Stainless Steel Housing | |||||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||||
1" | 1 7/16" | 2 3/4" | 5 1/2" | 1 13/16" | 3/4" | 1/2" | 4" | 2,650 | 1,400 | 900 | -30° to 160° | Self Aligning | Lubricated | 000000 | 0000000 | 0000000 | 00000 |
Low-Profile Mounted Ball Bearings with Two-Bolt Flange
Designed with a thin, compact housing, these bearings are good for space-constrained applications. Seals block out dust and contaminants.
Stainless steel bearings are more corrosion resistant than steel bearings.
Bearings with a set screw secure to shafts without using a collar. They let shafts rotate in both directions, so they’re good for applications where you need to reverse. However, the set screw will leave some marring on the shaft.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Min. Temp. Range, °F | Max. Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed 440C Stainless Steel Bearings with 304 Stainless Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
7/8" | 2 51/64" | 3 3/4" | 1 11/32" | 5/32" | 11/32" | 3" | 2,650 | 1,400 | 5,100 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 000000 |
1" | 2 51/64" | 3 3/4" | 1 11/32" | 5/32" | 11/32" | 3" | 2,650 | 1,400 | 5,100 | 0° | 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Food Industry Mounted Ball Bearings with Two-Bolt Flange
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food. Bearings are self-aligning to compensate for shaft misalignment.
Steel bearings are stronger than stainless steel bearings, but not as corrosion resistant.
Stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Bearings | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Radial Load Cap., lbs. | Optional Covers | |||||||||||||
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Specifications Met | Each | Each | ||
Shielded 440 Stainless Steel Bearings with 400 Series Stainless Steel Housing | ||||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||||
1" | 2 3/4" | 5 1/8" | 1 7/16" | 17/32" | 5/8" | 3 57/64" | 2,650 | 1,750 | 900 | -30° to 160° | Self Aligning | FDA Compliant 21 CFR 178.3570, NSF Registered H1 | 000000 | 0000000 | 0000000 | 00000 |
Food Industry Mounted Ball Bearings with Four-Bolt Flange
The lubricant in these mounted ball bearings is suitable for incidental contact with food. Bearings are self-aligning to compensate for shaft misalignment.
Steel bearings are stronger than stainless steel bearings, but not as corrosion resistant.
Stainless steel bearings are more corrosion resistant than steel bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Bearings | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Overall | Mounting | Radial Load Cap., lbs. | Optional Covers | ||||||||||||
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Specifications Met | Each | Each | ||
Shielded 420 Stainless Steel Bearings with 300 Series Stainless Steel Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
1" | 3 3/4" | 3 3/4" | 1 7/16" | 17/32" | 29/64" | 2 3/4" | 2,650 | 1,750 | 900 | -30° to 160° | FDA Compliant 21 CFR 177.1520 FDA Compliant 21 CFR 177.1680 FDA Compliant 21 CFR 177.2600 FDA Compliant 21 CFR 178.3570 NSF Registered H1 | 0000000 | 0000000 | 0000000 | 000000 |
Washdown Mounted Bearings with Three-Bolt Flange
Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants. They’re also suitable for incidental contact with food because they have NSF registered H1 lubricant. Made of stainless steel, these bearings are more corrosion resistant than steel bearings.
For technical drawings and 3-D models, click on a part number.
O'all | Mounting | Radial Load Cap., Lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. Lg. | Hole Ctr.-to-Ctr. Ht. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Specifications Met | Each | |
Sealed 440 Stainless Steel Ball Bearings with 304 Stainless Steel Housing—Self Aligning | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
1" | 2 15/16" | 4 3/4" | 2 3/4" | 1 27/64" | 3/8" | 25/64" | 1 5/8" | 1 1/8" | 2,650 | 1,400 | 550 | -10° to 250° | NSF Registered H1 | 0000000 | 0000000 |
25mm | 74.6mm | 121mm | 70mm | 35.1mm | 9.5mm | 25/64" | 41.3mm | 28.6mm | 2,650 | 1,400 | 550 | -10° to 250° | NSF Registered H1 | 0000000 | 000000 |