About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Ball and Roller Bearings
More
Light Duty Ball Bearings
Use these bearings where high speed and precision are not a concern.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
| 3/8" | 1" | 5/16" | Steel | 550 | 180 | 1,200 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
| 6901-2RS | 12 | 24 | 6 | 440C Stainless Steel | 550 | 260 | 16,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 699 | 9mm | 20mm | 6mm | 23mm | 1.5mm | Steel | 550 | 240 | 42,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
| 699-2Z | 9mm | 20mm | 6mm | 23mm | 1.5mm | Steel | 550 | 240 | 35,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
| 10 | 7 | 3 | 9 | M3 | 0.5 | 5 | 7 | 0.5 | 14,000 | 500 | 550 | 175° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
Thrust-Load-Rated Corrosion-Resistant Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
440C stainless steel rollers are harder and more wear resistant than 303 stainless steel rollers.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
440C Stainless Steel Flat Rollers with Seal | ||||||||||||||||
Hex Stud End Drive | ||||||||||||||||
| 1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 6,000 | 550 | 550 | 690 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |