About Plain Bearings
More
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
PTFE Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 1/4" | 7.5 lbs. @ 120 rpm | White | -350° to 500° | 000000 | 00000 |
For 3/16" Shaft Dia. | ||||||
5/16" | 1/4" | 7.5 lbs. @ 120 rpm | White | -350° to 500° | 000000 | 0000 |
For 1/4" Shaft Dia. | ||||||
3/8" | 1/4" | 7.5 lbs. @ 120 rpm | White | -350° to 500° | 000000 | 0000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/16" Shaft Dia. | ||||||||||
5/16" | 1/4" | 7/16" | 1/16" | 7.5 lbs. @ 120 rpm | 8.5 lbs. @ 120 rpm | White | -350° to 500° | ASTM D1710, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||||
5/8" | 1/4" | 7/8" | 1/16" | 7.5 lbs. @ 120 rpm | 14 lbs. @ 120 rpm | White | -350° to 500° | ASTM D1710, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 177.2600 | 0000000 | 0000 |
For 6 mm Shaft Dia. | ||||||||||
10mm | 6mm | 12mm | 2mm | 7.5 lbs. @ 120 rpm | 8.5 lbs. @ 120 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |