Filter by
Bearing Type
Housing Material
DFARS Compliance
About Linear Bearings
More
High-Speed Flange-Mounted Linear Sleeve Bearings
A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible. The flange-mount design is good for vertical linear motion applications. Bearings are for use with round end-supported shafts and are self-aligning to compensate for shaft misalignment. End seals keep contaminants out.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Shaft Clearance | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 2° Misalignment Capability | |||||||||||||||
Ceramic-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 1 5/16" | 1 1/4" | 1 1/4" | 3/16" | 1 1/4" | 7/8" | 150 lbs. @ 100 fpm | 1,600 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 5/32" | 0000000 | 000000 |
| 1/2" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 25/32" | 1 1/4" | 300 lbs. @ 100 fpm | 3,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 3/16" | 0000000 | 00000 |
| 3/4" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 6,100 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 7/32" | 0000000 | 00000 |
| 1" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 11,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 00000 |
| 1 1/4" | 3 5/8" | 3" | 3" | 1/2" | 3 3/16" | 2 1/2" | 1,500 lbs. @ 100 fpm | 16,000 | 0.0005" | -200° to 400° | Aluminum, Stainless Steel, Steel | 4 | 9/32" | 0000000 | 000000 |