Bearings are 440C stainless steel for good corrosion resistance.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Bearings with extended inner ring provide additional shaft support.

For technical drawings and 3-D models, click on a part number.

440C stainless steel bearings are more corrosion resistant than steel bearings.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

Bearings with extended inner ring provide additional shaft support.

For technical drawings and 3-D models, click on a part number.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required. All have an extended inner ring for additional shaft support.

Bearings with a black-oxide steel ring have some corrosion resistance.

Shielded bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than shielded bearings.

Bearings with a retaining ring have a removable retaining ring that holds the bearing inside a housing.

Flanged bearings have a flange that ensures proper positioning inside a tube or housing.

For technical drawings and 3-D models, click on a part number.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold. Tighten the single screw on the locking collar around its inner ring on your shaft to center and secure the shaft in the bearing bore. The collar’s firm grip reduces vibration and noise in your system. The steel rings on these bearings have a black-oxide finish for some corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed. Similar to 304 stainless steel, the nickel-coated steel rings on these bearings won’t break down from water. The extended inner ring increases shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food.

For technical drawings and 3-D models, click on a part number.

Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.

Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.

For technical drawings and 3-D models, click on a part number.