About Plain Bearings
More
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||
| 1 3/32" | 1 1/16" | 1 1/2" | 1/16" | 2,050 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
UHMW bearings resist chemicals better than 841 bronze bearings, and they retain oil better in wet environments. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings  | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | ||||||||||||
| 1 3/32" | 1 1/16" | 1 1/2" | 1/16" | 130 lbs. @ 60 rpm | 80 lbs. @ 60 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 000000 |
Press-Fit Drill Bushings
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.7656" ID | ||||||||||||
| 1" | 1 1/16" | 49/64" | 0.0002" to 0.0006" | 0.0015" to 0.0018" | -0.015" to 0.015" | P | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |