About Plain Bearings
More
Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/639/6391k214p1-d03c-digitall@halfx_637055105703313267.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/374/3741k9p1-d03c-digitall@halfx_637055970649769879.png?ver=imagenotfound)
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1/4" | 1/8" | 60 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/168/1688k16p1-d03c-digitall@halfx_637051672182538562.png?ver=imagenotfound)
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/8" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
1/4" | 1/8" | 31 lbs. @ 120 rpm | Lubricated | SAE 80 Oil with PTFE | -40° to 460° | 00000000 | 00000 |
High-Temperature Dry-Running Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
![](/prerenderstable/mvPRE/contents/gfx/imagecache/936/9368t25p1-d03c-digitall@halfx_637054253904243363.png?ver=imagenotfound)
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication Method | Temperature Range, °F | Each | |
841 Bearing Bronze | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 1/8" | 25 lbs. @ 120 rpm | Embedded | -50° to 700° | 0000000 | 00000 |
Multipurpose Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/638/6381k47p1-d03c-digitall@halfx_637056020238194639.png?ver=imagenotfound)
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 1/8" Shaft Dia. | ||||||
1/4" | 1/8" | 60 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Press-Fit Drill Bushings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/849/8491a452p1-upa06-@halfx_637644482421371219.png?ver=imagenotfound)
Mount flush with jig plates for precise drilling. These bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
OD | Lg. | For Drill Bit Size | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.1875" ID | ||||||||||||
5/16" | 1/8" | 3/16" | 0.0001" to 0.0004" | 0.0013" to 0.0016" | -0.01" to 0.01" | P | Steel | Rockwell C61 | 00000000 | 000000 | 000000 | 000000 |