About Plain Bearings
More
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface. All are FDA Compliant or NSF Registered, so they're safe for use in food applications.
UHMW bearings resist chemicals better than 841 bronze bearings, and they retain oil better in wet environments. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
UHMW Plastic Bearings  | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | ||||||||||||
| 1 5/8" | 1 9/16" | 2 1/4" | 1/16" | 390 lbs. @ 30 rpm | 250 lbs. @ 30 rpm | Gray | Lubricated | Mineral Oil | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 000000 |
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1 1/2" Shaft Dia. | |||||||||
| 1 5/8" | 1 9/16" | 2 1/4" | 1/16" | 700 lbs. @ 10 rpm | 660 lbs. @ 10 rpm | White | 0° to 200° | 0000000 | 00000 |
Wheel Reducer Bushings
Reduce the inside diameter of a bearing to fit a particular axle size. Also known as spanner bushings, they also reduce wear on the axle when used in plain bores and with straight roller bearings. All have a hole for lubrication.
Washers slide over the bushing and add 3/32" to the hub length of your wheel. Multiple washers can be used to match the length of the bushing.
For technical drawings and 3-D models, click on a part number.
