About Plain Bearings
More
Easy-Install Dry-Running Flanged Sleeve Bearings
A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Nylon Plastic Bearings  | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||
| 11/16" | 29/32" | 15/16" | 1/32" | 165 lbs. @ 20 rpm | 115 lbs. @ 20 rpm | White | 0° to 200° | 0000000 | 00000 |
For 7/8" Shaft Dia. | |||||||||
| 15/16" | 29/32" | 1 5/16" | 1/32" | 235 lbs. @ 20 rpm | 225 lbs. @ 20 rpm | White | 0° to 200° | 0000000 | 0000 |
Press-Fit Drill Bushings with Head
The head prevents these bushings from being pushed through the jig when drilling pressure is extreme. The head sits above the jig plate or can be mounted flush by installing in a counterbored hole. Drill bushings can also be used as spacers, shims, and machinery bushings.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| OD | Lg. | For Drill Bit Size | OD | Thick. | ID | OD | Lg. | Drill Bushing Type | Material | Hardness | 1-5 | 6-11 | 12-Up | |
0.5" ID | ||||||||||||||
| 3/4" | 29/32" | 1/2" | 7/8" | 3/32" | 0.0001" to 0.0006" | 0.0015" to 0.0018" | -0.01" to 0.01" | HL | Steel | Rockwell C61 | 000000000 | 000000 | 000000 | 000000 |