Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.

Bearings with a set-screw shaft mount secure to shafts with no need for an additional collar. They can be used for bi-directional shaft rotation when applications require reversing action. The set screw may cause some marring on the shaft.

Bearings with an eccentric-lock shaft mount are better than bearings with a set-screw shaft mount for high-speed applications, but only rotate in a single direction.

For technical drawings and 3-D models, click on a part number.

The lubricant in these mounted ball bearings is suitable for incidental contact with food. Bearings are self-aligning to compensate for shaft misalignment.

Stainless steel bearings are more corrosion resistant than steel bearings.

Shielded bearings dissipate heat more efficiently than sealed bearings.

For technical drawings and 3-D models, click on a part number.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting. Their 316 stainless steel housing has excellent corrosion resistance and prevents rust caused by salt water, chlorine solutions, and chemicals. All have USDA H1 approved lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.

Set screw bearings grip shafts as you tighten their screw. They don’t use a collar, but the screw leaves some marring on shafts.

Clamp on bearings have a locking collar to center shafts and secure them better than set screw bearings, so there’s less vibration and noise. To install them, tighten the locking collar’s screw until it secures against the inner ring.

Snap optional covers onto bearings to protect them from moisture. Made of polypropylene, they resist corrosion, don’t absorb water, and are FDA compliant.

For technical drawings and 3-D models, click on a part number.