About Plain Bearings
More
Oil-Embedded Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/633/6338k419c3-d03c-digital-master1569879013-p9@halfx_637054673023484059.png?ver=imagenotfound)
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||||
12mm | 7mm | 18mm | 1mm | 215 lbs. @ 120 rpm | 540 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
For 12mm Shaft Dia. | ||||||||||
14mm | 7mm | 20mm | 1mm | 260 lbs. @ 120 rpm | 620 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/270/2705t28--9a0fc58fd61605198647-p9@halfx_637407738498197238.png?ver=imagenotfound)
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||
10mm | 7mm | 15mm | 1mm | 85 lbs. @ 120 rpm | 100 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
For 28mm Shaft Dia. | |||||||||
32mm | 7mm | 35mm | 2mm | 340 lbs. @ 30 rpm | 480 lbs. @ 30 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Food Industry Dry-Running Flanged Sleeve Bearings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/577/57785k217--6d22558aaeb1610463822-p9@halfx_637460390237651383.png?ver=imagenotfound)
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re commonly used on machines in food plants and manufacturing plants for packaging and healthcare equipment. These bearings are bright blue, so they’re easy to spot in your line in case of breakage.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Acetal Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||||
12mm | 7mm | 18mm | 1mm | 15 lbs. @ 120 rpm | 39 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 00000 |
For 12mm Shaft Dia. | ||||||||||
14mm | 7mm | 20mm | 1mm | 18 lbs. @ 120 rpm | 45 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |
Metric Press-Fit Drill Bushings
![](/prerenderstable/mvPRE/contents/gfx/imagecache/969/96990a403p1-a06a-digitall@halfx_637133939270486603.png?ver=imagenotfound)
Also known as jig bushings, these metric drill bushings fit inside fixture plate holes to guide drill bits, counterbores, reamers, and other cutting tools. They improve accuracy so that your drilled holes and cuts are consistent from part to part. Known for their versatility, drill bushings are also used as spacers, shims, and machinery bushings. These bushings are made of hardened, ground steel that holds its shape and resists wear, so they last for many cycles without needing to be replaced.
All bushings have a chamfer on the outside that centers the bushing as you place it into the hole. Press into place with a manual or hydraulic press. They also have internal chamfers, so it's easier to insert bits, pins, and punches into the bushing. DIN 179 bushings meet dimensional and material standards that make sure they're compatible with other parts and tools. Although DIN 179 is no longer an active standard, it's still a common reference point for designers.
Don't see the size you need? Additional sizes are available.
For technical drawings and 3-D models, click on a part number.
Tolerance | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | Internal Chamfer | For Drill Bit Size | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
10 mm ID | ||||||||||||||
18 | 7 | One End | 10 mm | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 000000 | 000000 | 000000 |
Tolerance | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | Internal Chamfer | For Drill Bit Size | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
12.5 mm ID | ||||||||||||||
16 | 7 | One End | 12.5 mm | 0.016 to 0.034 | 0.012 to 0.023 | -0.2 to 0.2 | PM | Steel | Rockwell C61 | DIN 179 | 000000000 | 000000 | 000000 | 000000 |
Metric Press-Fit Drill Bushings with Head
![](/prerenderstable/mvPRE/contents/gfx/imagecache/969/96977a421-1574804965-p9@halfx_637103822480009782.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i14/i147-length--40b2880035c1610474410-p9@halfx_637460496132093226.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/4x-/4x-flushincounterborehole-1610136778-p9@halfx_637457119842706889.png?ver=imagenotfound)
![](/prerenderstable/mvPRE/contents/gfx/imagecache/i20/i200-sittingonjigplate--196346194331611091392-p9@halfx_637466665960604012.png?ver=imagenotfound)
Even under extreme drilling pressure, these metric bushings won't press through your jig plate. A flanged head on the top of the bushing acts as a stop, preventing it from moving as you push down your drill bit, reamer, or other cutting bit. Drill bushings ensure accurate, consistent cuts and drilled holes from one part to the next. They sometimes also work as spacers, shims, and machinery bushings. Made of hardened, ground steel, these bushings hold their shape and resist wear over time. The flanged head protects your jig plate from damage caused by heavy use.
Although it's no longer an active standard, DIN 172 is still a common reference point for making sure parts are compatible with other parts and tools.
These bushings work in both countersunk and standard drill holes. To install, place the bushing inside the hole in your jig. A chamfered edge on the bottom of the bushing helps center the bushing in the hole. Once centered, press the bushing into the hole with a hydraulic or lever press.
For technical drawings and 3-D models, click on a part number.
Head | Tolerance | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
OD, mm | Lg., mm | OD, mm | Thick., mm | ID, mm | OD, mm | Lg., mm | Drill Bushing Type | Material | Hardness | Specifications Met | 1-5 | 6-11 | 12-Up | |
0.9 mm ID | ||||||||||||||
3 | 7 | 6 | 2 | 0.006 to 0.016 | 0.004 to 0.01 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 000000 | 000000 | 000000 |
1 mm ID | ||||||||||||||
3 | 7 | 6 | 2 | 0.006 to 0.016 | 0.004 to 0.01 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.1 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.2 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.3 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.4 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.5 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.6 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.7 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.8 mm ID | ||||||||||||||
4 | 7 | 7 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 00000 |
1.9 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.1 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.2 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.3 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.4 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.5 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
2.6 mm ID | ||||||||||||||
5 | 7 | 8 | 2 | 0.006 to 0.016 | 0.008 to 0.016 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 0000 | 0000 |
5.1 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.2 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.3 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.4 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.5 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.6 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.7 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.8 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
5.9 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6 mm ID | ||||||||||||||
10 | 7 | 13 | 3 | 0.01 to 0.022 | 0.01 to 0.019 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.1 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.2 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.3 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.4 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.5 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.6 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.7 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.8 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
6.9 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.1 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.2 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.3 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.4 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.5 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.6 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.7 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.8 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
7.9 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |
8 mm ID | ||||||||||||||
12 | 7 | 15 | 3 | 0.013 to 0.028 | 0.012 to 0.023 | -0.2 to 0.2 | H | Steel | Rockwell C61 | DIN 172 | 000000000 | 00000 | 00000 | 0000 |