95.3mm Length Bearings | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

4 Products

About Ball and Roller Bearings

Mounted Ball Bearings with Four-Bolt Flange

Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.

Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw leaves some marring on shafts. Use them in applications where shafts rotate in both directions.

For technical drawings and 3-D models, click on a part number.

Bearings

Set Screw Mount

	Overall				Mounting		Radial Load Cap., lbs.
For Shaft Dia.	Ht.	Lg.	Wd.	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic	Static	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Sealed Steel Bearings with Cast Iron Housing
Shaft Mount Type: Set Screw
25mm	95.3mm	95.3mm	36.5mm	13.5mm	11.9mm	69.9mm	2,800	1,650	6,300	-20° to 220°	Self Aligning	Lubricated	000000	0000000

Permanently Lubricated Washdown Mounted Ball Bearings with Four-Bolt Flange

Set Screw Shaft Mount

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. With a 316 stainless steel housing, these bearings won’t rust from salt water, chlorine, or chemicals. All are lubricated with NSF registered H1 grease, which is certified for incidental contact with food.

Set-screw bearings secure to shafts as you tighten their screw. They don’t need a collar; however, the screws leave some marring on the shaft.

For technical drawings and 3-D models, click on a part number.

	Overall				Mounting		Radial Load Capacity, lbs.
For Shaft Dia.	Height	Length	Width	Flange Thick.	Hole Dia.	Hole Ctr.-to-Ctr.	Dynamic	Static	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Environmental Rating		Each
Sealed Steel Bearings with 316 Stainless Steel Housing
Shaft Mount Type: Set Screw
25mm	36.5mm	95.3mm	61.9mm	13.5mm	11.1mm	69.9mm	2,800	1,650	2,700	-20° to 220°	Self Aligning	IP69K	0000000	0000000

Thread-Mount Bearings

Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface. Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.

NPSM (National Pipe Straight Mechanical) threads are compatible with NPT threads. See more about pipe thread type and sizing.

For technical drawings and 3-D models, click on a part number.

		Overall						Radial Load Cap., lbs.
For Shaft Dia.	Center Ht.	Ht.	Lg.	Wd.	Pipe Size	Thread Type	Thread Lg.	Dynamic	Static	Max. Speed, rpm	Temp. Range, °F	Alignment Style	Lubrication		Each
Sealed Steel Bearings with Ductile Iron Housing
Shaft Mount Type: Set Screw
40mm	73mm	120.7mm	95.3mm	49.2mm	3/4	NPSM	19.1mm	7,300	4,450	4,100	-20° to 220°	Self Aligning	Lubricated	0000000	0000000

Positioning Tables with Micrometer

The micrometer handles ensure accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

For technical drawings and 3-D models, click on a part number.

Metric

		O'all			Carriage					Carriage Mounting		Base Mounting
Static Load Cap., lbs.	Travel Lg., mm	Wd., mm	Lg., mm	Ht., mm	Wd., mm	Lg., mm	Handle Dia., mm	Micrometer Graduation Marks, mm	Max. Temp., °F	No. of Holes	Hole Thread Size	No. of Holes	For Fastener Thread Size	Mounting Fasteners Included		Each
Aluminum Carriage and Base
4	13	44.5	95.3	9.7	44.5	44.5	10.4	0.01	180°	10	M2	4	M2	No	00000000	0000000