Designed to stand up to frequent washdowns, you can quickly secure these ball bearings onto shafts with the clamp-on collar in food, beverage, pharmaceutical, and chemical plants. The collar centers your shafts and secures them better than set screw ball bearings, which reduces vibration and noise. To install these bearings, tighten the single screw on the collar around its inner ring on your shaft for a mar-free hold.

Coated with nickel, the steel rings on these bearings won’t corrode from water and harsh cleaners, similar to 304 stainless steel. The inner ring is extended for added shaft support. All of these bearings have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.

For technical drawings and 3-D models, click on a part number.

Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.

For technical drawings and 3-D models, click on a part number.

Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.

Washers allow you to use the bearing on unhardened and unground surfaces.

For technical drawings and 3-D models, click on a part number.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants. All have NSF registered H1 lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.

Polymer-coated cast iron bearings are also known as tapped-base mounted ball bearings. They require access to the underside of the mounting surface.

Set screw bearings secure to shafts as you tighten their screw. They don’t need a collar, but the screw does leave some marring on shafts.

For technical drawings and 3-D models, click on a part number.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the temperature of standard mounted ball bearings. Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food. The lubrication is NSF registered H1 for incidental contact with food. Because they’re permanently lubricated, these bearings are good for use in hard-to-reach areas or spaces that don’t receive regular maintenance. Also known as tapped base mounted ball bearings, they have threaded holes for fastening through the bottom to secure shafts in tight spaces. Having no mounting bolts on top makes them easier to clean, as well.

Set screw shaft mount bearings secure to shafts with no need for a collar. The set screw may cause marring on shafts.

Concentric lock shaft mount bearings center and secure shafts in the bearing bore. To install, tighten the single screw on the locking collar around its inner ring on your shaft. By gripping shafts firmly, they reduce vibration in your system for quieter operation.Block 3

For technical drawings and 3-D models, click on a part number.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

Sealed bearings block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange. Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.

For technical drawings and 3-D models, click on a part number.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. With a 316 stainless steel housing, these bearings won’t rust from salt water, chlorine, or chemicals. All are lubricated with NSF registered H1 grease, which is certified for incidental contact with food.

Set-screw bearings secure to shafts as you tighten their screw. They don’t need a collar; however, the screws leave some marring on the shaft.

Concentric-lock bearings have a collar that centers and secures the shaft in the bearing bore. To install, tighten the single screw on the collar around its inner ring on your shaft. These bearings have a secure grip on the shaft that reduces vibration and noise.

For technical drawings and 3-D models, click on a part number.