Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications. They also have excellent chemical and corrosion resistance.

For technical drawings and 3-D models, click on a part number.

These PEEK bearings operate in temperatures almost twice as high as our other plastic ball bearings. They also have good chemical resistance and excellent corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance. The flange ensures proper positioning inside a tube or housing.

For technical drawings and 3-D models, click on a part number.

These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.

Open bearings dissipate heat more efficiently than shielded bearings.

For technical drawings and 3-D models, click on a part number.

With a considerably larger ID than our Face-Mount Crossed-Roller Bearings, use these to run hydraulic lines, electrical wiring, and other components through the inside of the bearing. The rollers face in alternating directions to allow for rigid, accurate motion under any combination of radial, thrust, and moment (twisting) loads. Use in applications where highly accurate motion is necessary, such as machine tools and industrial robots.

Open bearings dissipate heat more efficiently than sealed bearings.

Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.

For technical drawings and 3-D models, click on a part number.

Use these bearings in corrosive environments and under water. All are self-aligning to compensate for shaft misalignment.

Acetal bearings are more economical than 316 stainless steel bearings.

316 stainless steel bearings handle heavier loads than acetal bearings.

For technical drawings and 3-D models, click on a part number.

Use these bearings in corrosive environments and under water. All are self-aligning to compensate for shaft misalignment.

Acetal bearings are more economical than 316 stainless steel bearings.

316 stainless steel bearings handle heavier loads than acetal bearings.

For technical drawings and 3-D models, click on a part number.

Because they never need to be relubricated, these rollers are a good choice for hard-to-reach places. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers have end seals to block dirt and contamination.

Crowned rollers have a slight curve, which is invisible to the naked eye, to stay centered on surfaces that are not perfectly aligned and/or not perfectly flat.

For technical drawings and 3-D models, click on a part number.