About Rod Ends

More
About Ball and Roller Bearings
More
High-Load Ball Bearings
With a wider profile than standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
1605 | 5/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 000000 |
1606 | 3/8" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
1607 | 7/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
1605-2Z | 5/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 000000 |
1606-2Z | 3/8" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
1607-2Z | 7/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |

Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
1605-2RS | 5/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 000000 |
1606-2RS | 3/8" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
1607-2RS | 7/16" | 29/32" | 5/16" | Steel | 690 | 300 | 5,000 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Light Duty Ball Bearings


Use these bearings where high speed and precision are not a concern.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
3005-2Z | 5/16" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 000000 |
3006-2Z | 3/8" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3007-2Z | 7/16" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Sealed | ||||||||||||
3005-2RS | 5/16" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3006-2RS | 3/8" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
3007-2RS | 7/16" | 29/32" | 5/16" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 0000000 | 00000 |
Flanged Ball Bearings
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Bearings with extended inner ring provide additional shaft support.
For technical drawings and 3-D models, click on a part number.


with Extended
Inner Ring
Flange | Inner Ring | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | OD | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
3/8" | 29/32" | 11/32" | 1" | 0.06" | 0.5" | 0.406" | Steel | 350 | 300 | 2,500 | Lubricated | -20° to 250° | Not Rated | 00000000 | 000000 |
Swivel Joints


Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. They need to be lubricated when first installed and periodically after that. Apply any type of bearing grease to the ball, and rotate it to work it into the races.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
Open | ||||||||
---|---|---|---|---|---|---|---|---|
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | Alloy Steel | 00000000 | 00000 |
Lubrication-Free Swivel Joints


A slippery PTFE liner reduces friction without the oily mess. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | -65° to 275° | Alloy Steel | 00000000 | 000000 |
Lubrication-Free Corrosion-Resistant Swivel Joints


A slippery PTFE liner reduces wear and eliminates the need for lubrication. Made of stainless steel, these swivel joints are stronger than plastic models and more corrosion resistant than steel ones. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 13,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 000000 |
Corrosion-Resistant Swivel Joints


Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints. Ball is heat treated for strength. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. They don't come lubricated, so you'll need to lubricate during installation and on an ongoing basis.
For technical drawings and 3-D models, click on a part number.
ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,900 | 303 Stainless Steel | 00000000 | 000000 |