Filter by
Bearing Type
DFARS Compliance
For Load Direction
Housing Material
High-Speed Dry-Running Mounted Sleeve Bearings
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings. They’re dry running, meaning they don’t require lubrication. These bearings swivel to compensate for small amounts of shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Diameter | Center Height | Height | Length | Width | Bearing Width | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
| 6mm | 9.5mm | 19.1mm | 36.5mm | 9.7mm | 9.7mm | 5.2mm | 28.6mm | 80 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 6mm | 9.5mm | 19mm | 36.5mm | 9.5mm | 10.2mm | 5mm | 28.5mm | 175 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |