Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.
Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
| 6mm | 19mm | 41.5mm | 10mm | 10mm | 4.8mm | 4.5mm | 31.5mm | 37 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 6mm | 19mm | 41.5mm | 10mm | 9.5mm | 5mm | 4.5mm | 32mm | 185 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |