Dry-Running Mounted Sleeve Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Acetal bearings do not warp or swell when exposed to water, so they’re often used in washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
6mm | 14.5mm | 28.6mm | 57.2mm | 9.8mm | 9.8mm | 7.1mm | 44.5mm | 36 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
8mm | 14.5mm | 28.6mm | 57.2mm | 11.2mm | 11.2mm | 7.1mm | 44.5mm | 42 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
10mm | 14.5mm | 28.6mm | 57.2mm | 11.2mm | 11.2mm | 7.1mm | 44.5mm | 42 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
12mm | 14.5mm | 28.6mm | 57.2mm | 16mm | 16mm | 7.1mm | 44.5mm | 60 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
High-Speed Dry-Running Mounted Sleeve Bearings
Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings. They’re dry running, meaning they don’t require lubrication. These bearings swivel to compensate for small amounts of shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Diameter | Center Height | Height | Length | Width | Bearing Width | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
Acetal Plastic Bearings with Aluminum Housing | ||||||||||||
8mm | 14.3mm | 28.7mm | 57.2mm | 11.2mm | 11.2mm | 7.1mm | 44.5mm | 95 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 000000 |
10mm | 14.3mm | 28.7mm | 57.2mm | 11.2mm | 11.2mm | 7.1mm | 44.5mm | 95 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
12mm | 14.3mm | 28.7mm | 57.2mm | 16mm | 16mm | 7.1mm | 44.5mm | 140 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 0000000 | 00000 |
High-Speed Dry-Running Mounted Sleeve Bearings with Two-Bolt Flange
Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal. They don’t require any additional lubrication. To compensate for minor shaft misalignment, they’re self-aligning. Mount them using their two-bolt flange.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Diameter | Height | Length | Width | Bearing Width | Flange Thickness | Hole Diameter | Hole Center-to-Center | Dynamic Radial Load Capacity | Temperature Range, °F | Alignment Style | Each | |
PTFE Plastic-Filled Acetal Bearings with Aluminum Housing | ||||||||||||
8mm | 28.6mm | 57.2mm | 11.2mm | 11.2mm | 4.8mm | 7.14mm | 44.5mm | 95 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 000000 |
10mm | 28.6mm | 57.2mm | 16mm | 16mm | 4.8mm | 7.1mm | 44.5mm | 140 lbs. @ 120 rpm | -40° to 180° | Self Aligning | 00000000 | 00000 |