About Ball and Roller Bearings
More
Mounted Ball Bearings with Two-Bolt Flange
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Bearings with a set-screw shaft mount secure to shafts with no need for an additional collar. They can be used for bi-directional shaft rotation when applications require reversing action. The set screw may cause some marring on the shaft.
Bearings with an eccentric-lock shaft mount are better than bearings with a set-screw shaft mount for high-speed applications, but only rotate in a single direction.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||
| 1 11/16" | 4 3/8" | 7 1/16" | 2 3/16" | 9/16" | 9/16" | 5 53/64" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 0000000 |
| 1 3/4" | 4 3/8" | 7 1/16" | 2" | 9/16" | 9/16" | 5 27/32" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Shaft Mount Type: Eccentric Lock | ||||||||||||||
| 1 3/4" | 4 3/8" | 7 1/16" | 2 9/32" | 9/16" | 9/16" | 5 27/32" | 7,450 | 4,850 | 4,300 | -20° to 210° | Self Aligning | Lubricated | 00000000 | 000000 |
Easy-Align Mounted Ball Bearings with Two-Bolt Flange
An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft. You only need to loosen the bolt instead of removing it to adjust. They’re self-aligning to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Lg. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, ° F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
| 1 5/8" | 4 3/8" | 7 1/16" | 2 1/16" | 9/16" | 19/32" | 2 27/32" | 5 53/64" | 7,650 | 4,750 | 3,000 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
| 1 11/16" | 4 3/8" | 7 1/16" | 2 1/16" | 9/16" | 19/32" | 2 27/32" | 5 53/64" | 7,650 | 4,750 | 3,000 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
| 1 3/4" | 4 3/8" | 7 1/16" | 2 1/16" | 9/16" | 19/32" | 2 27/32" | 5 53/64" | 7,650 | 4,750 | 3,000 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 00000 |
Washdown Mounted Ball Bearings with Two-Bolt Flange
Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting. Their 316 stainless steel housing has excellent corrosion resistance and prevents rust caused by salt water, chlorine solutions, and chemicals. All have USDA H1 approved lubrication, which is certified for incidental contact with food and is suitable for food and beverage applications.
Set screw bearings grip shafts as you tighten their screw. They don’t use a collar, but the screw leaves some marring on shafts.
Snap optional covers onto bearings to protect them from moisture. Made of polypropylene, they resist corrosion, don’t absorb water, and are FDA compliant.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dp. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Specifications Met | Each | |
Sealed Steel Bearings with 316 Stainless Steel Housing | ||||||||||||||||
Shaft Mount Type: Set Screw | ||||||||||||||||
| 1 11/16" | 2 3/16" | 4 3/8" | 7 1/16" | 3 3/64" | 1 9/16" | 1.563" | 5 27/32" | 7,900 | 5,100 | 1,500 | -20° to 220° | Self Aligning | Lubricated | NSF Registered H1 | 0000000 | 0000000 |
| For Shaft Diameter | OD | Material | Mount Type | Temperature Range,°F | Specifications Met | Each | |
Closed | |||||||
|---|---|---|---|---|---|---|---|
| 1 11/16", 1 3/4", 45mm | 3 9/16", 90mm | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 000000 |
Open | |||||||
| 1 11/16" | 3 9/16" | Polypropylene Plastic | Snap In | -20° to 220° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |