About Ball and Roller Bearings
More
Thrust Ball Bearings for Shaft Ends
Use these bearings as miniature high-precision turntables. They have a unique design that allows your shaft to sit on top of the bearing rather than being inserted through it. Bearings can be bonded to a mounting plate or press-fit into a hole.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Open | ||||||||||
| 3/8" | 3/8" | 1/4" | Steel | 400 | 620 | 1,500 | Required | -40° to 250° | 00000000 | 000000 |
| 1/2" | 1/2" | 5/16" | Steel | 700 | 1,100 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 5/8" | 5/8" | 7/16" | Steel | 1,150 | 1,850 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 11/16" | 11/16" | 1/2" | Steel | 1,300 | 2,100 | 1,500 | Required | -40° to 250° | 00000000 | 00000 |
| 3/4" | 3/4" | 9/16" | Steel | 1,700 | 2,750 | 1,500 | Required | -40° to 250° | 00000000 | 00000 |
| 13/16" | 13/16" | 5/8" | Steel | 2,150 | 3,500 | 1,500 | Required | -40° to 250° | 00000000 | 00000 |
| 7/8" | 7/8" | 11/16" | Steel | 2,150 | 3,500 | 1,500 | Required | -40° to 250° | 00000000 | 00000 |
| 15/16" | 15/16" | 3/4" | Steel | 2,600 | 4,350 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 1" | 1" | 3/4" | Steel | 3,050 | 5,200 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 1 1/8" | 1 1/8" | 7/8" | Steel | 3,650 | 6,300 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 1 3/16" | 1 3/16" | 15/16" | Steel | 4,300 | 7,500 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 1 7/16" | 1 7/16" | 1 3/16" | Steel | 5,700 | 10,200 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |
| 1 11/16" | 1 11/16" | 1 1/4" | Steel | 7,550 | 14,100 | 1,500 | Required | -40° to 250° | 0000000 | 00000 |