We will reply to your message within an hour.
More
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
These bearings have twice as many contact points as angular-contact ball bearings.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
With thicker inner and outer raceways, these bearings can handle heavier loads than thin-profile crossed roller bearings. Mounting holes on the inner and outer rings allow for fastening onto hollow joints and shafts.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches.
The choice for low-friction motion in high-temperature environments.
With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.
Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle.
Used in pairs or with another bearing retaining nut, these jam nuts—often called shaft nuts—hold bearings, bushings, pulleys, and gears in place on your threaded shaft or spindle.