About Ball and Roller Bearings
More
About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6018-2Z | 90 | 140 | 24 | Steel | 13,600 | 11,200 | 5,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 0000000 |
6214-2Z | 70 | 125 | 24 | Steel | 14,300 | 10,100 | 5,600 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
Sealed | ||||||||||||
6018-2RS | 90 | 140 | 24 | Steel | 13,600 | 11,200 | 3,000 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
6214-2RS | 70 | 125 | 24 | Steel | 14,300 | 10,100 | 3,400 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
Self-Aligning Ball Bearings
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2305 | 25 | 62 | 24 | Steel | 6,050 | 1,550 | 16,000 | Lubricated | 3° | -30° to 210° | ABEC-1 | 0000000 | 0000000 |
Sealed | |||||||||||||
2305-2RS | 25 | 62 | 24 | Steel | 4,250 | 1,200 | 7,500 | Lubricated | 1.5° | -30° to 210° | ABEC-1 | 0000000 | 000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6214-2RS | 70mm | 125mm | 24mm | 440C Stainless Steel | 14,000 | 9,900 | 3,200 | Lubricated | -20° to 210° | ABEC-1 | 00000000 | 0000000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Sealed—Both Sides | ||||||||||||
50mm | 58mm | 24mm | Steel | 6,950 | 14,150 | 3,150 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 000000 |
Bearing Retaining Nuts
Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket.
Chamfered-face retaining nuts weigh less and produce less heat than stepped-face nuts. Some meet ISO 2982 (formerly DIN 981), an international standard for bearing locknut dimensions. Their sizes correspond to SKF KM series. Use them with DIN 5406 spring lock washers.
Carbon steel retaining nuts are strong and resist wear.
For technical drawings and 3-D models, click on a part number.