Selecting Compatible Lead Screws and Nuts
More
Square Maintenance-Free Turntables
The sealed ball bearings will never need additional lubrication. These turntables add rotational positioning to machinery and equipment.
For technical drawings and 3-D models, click on a part number.
Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Overall Ht. | Material | Type | Material | Mounting Fasteners Included | Each | |
Lubricated | |||||||||
| 10,000 | 6.5" | 6.5" | 2.72" | Blue-Painted Iron | Ball | Steel | No | 0000000 | 000000000 |
Maintenance-Free Lockable Turntables
The sealed ball bearings will never need additional lubrication. These turntables lock into one of four positions. To unlock, pull the ring on the spring-loaded locking pin and turn it 90°. Turntables add rotational positioning to machinery and equipment.
For technical drawings and 3-D models, click on a part number.
Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Capacity, lbs. | Lg. | Wd. | Overall Ht. | Material | Type | Material | Mounting Fasteners Included | Each | |
Lubricated | |||||||||
| 10,000 | 6.5" | 6.5" | 2.72" | Blue-Painted Iron | Ball | Steel | No | 0000000 | 000000000 |
End Supports for Lead Screws and Ball Screws
A set of ball bearings reduces friction and secures the end of a ball or lead screw. Note: The end of your ball or lead screw must be machined before installing it into an end support.
For technical drawings and 3-D models, click on a part number.
End supports for radial loads handle loads perpendicular to the lead screw.
Face Mounting Holes | Top Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Ht. | Center Ht. | Wd. | Dp. | No. of Mounting Holes | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Dia. | Ctr.-to-Ctr. Wd. | Temperature Range, °F | Each | |
Alloy Steel | |||||||||||||
| 1 3/16" | 3 5/8" | 1 7/8" | 6 1/2" | 1 21/32" | 6 | 21/32" | 4 3/4" | 2" | 29/32" | 4 3/4" | -40° to 210° | 000000000 | 0000000 |
End supports for combined radial and thrust loads handle radial loads (perpendicular to the lead screw) and thrust loads (parallel to the lead screw).
Combined Load Cap., lbs. | Face Mounting Holes | Top Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ID | Ht. | Center Ht. | Wd. | Dp. | Static | Dynamic | No. of Mounting Holes | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Dia. | Ctr.-to-Ctr. Wd. | Temperature Range, °F | Each | |
Alloy Steel | |||||||||||||||
| 1 3/16" | 3 5/8" | 1 7/8" | 6 1/2" | 3" | 5,200 | 3,050 | 6 | 21/32" | 4 3/4" | 2" | 29/32" | 4 3/4" | -40° to 210° | 00000000 | 0000000 |