McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    58 Products

    Electric Bench Buffer/Polishers

    Image of Product. Front orientation. Buffers and Polishers. Electric Bench Buffer/Polishers.
    Clean, touch up, and finish surfaces with these tools that affix to your bench top. Each spindle holds a buffing or polishing wheel.
    1,750 rpm—Run at low speeds for delicate polishing.
    3,600 rpm—Run at high speeds to remove deep scratches and make heavy repairs.
    For Buffing and
    Polishing Wheel
    Overall
    Arbor Hole
    Dia.
    Dia.
    Thk.
    Max. No-Load Rotational
    Speed, rpm
    Power,
    hp
    Motor Shaft
    Dia.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Current
    (Voltage)
    Electrical
    Connection Type
    Includes
    Each
     
    1 Speed
    1/2"6"1/4" to 1"1,7501/41/2"18 1/2"10"10 1/2"172.5 amp (120V AC)Plug InTwo Wheel Arbors4757A10000000
    1/2"6"1/2" to 3/4"3,6001/31/2"19"7 3/4"9 3/4"254.2 amp (115V AC)Plug InTwo Wheel Arbors4757A11000000
    3/4"8"3/8" to 1 1/4"3,6003/43/4"28 1/2"8 1/2"11 1/2"564.8 amp (115V AC)
    2.4 amp (230V AC)    		Plug InTwo Wheel Arbors4757A1500000000
     
    Accessories for Buffers and Polishers
    Stands
    Image of Product. Front orientation. Bench and Pedestal Grinder Stands. Electric Bench Buffer/Polishers.
    Base
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Material
    Each
    32 7/8"15 3/4"14"62Iron4423A30000000
    Wheel Guards
    Image of Product. Front orientation. Chip Guards. Electric Bench Buffer/Polishers.
    Wheel guards (sold separately) protect your work area from flying debris.
    For Buffing and
    Polishing Wheel Dia.
    Material
    For Buffer Shaft
    Location
    Includes
    Each
    6", 8"SteelLeft Side, Right SideOne Wheel Guard4757A37000000

    Light Duty Bench Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Light Duty Bench Grinders.
    Image of Product. Grinder with Wire Brush. Front orientation. 0.5" Wire Wheel Brush. Light Duty Bench Grinders.

    Grinder with Wire Brush

    Use these grinders for occasional bench grinding, tool sharpening, and buffing.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    0.5" Wire Wheel Brush—Grinder with wire wheel brush can also be used for polishing and removing rust and scale.
    Bench Grinders
    Replacement
    Rocker Switches
    Replacement
    Toggle Switches
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Each
    Each
    Fixed Speed
     
    CSA Certified, ANSI/UAMA B7.1, OSHA Compliant 29 CFR 1926.303
    6"3,4501/31/2"120V AC/240V ACPlug InSingleToggle3/4"2 1/2"—Totally Enclosed28Grinding Wheel, 36-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A1100000004689A35000000———0
    7"3,4501/25/8"120V AC/240V ACPlug InSingleRocker1"2 1/2"Cast IronTotally Enclosed5436-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A810000004689A3500000———0
    8"3,4503/45/8"120V AC/240V ACPlug InSingleToggle1"2 1/2"—Totally Enclosed58Grinding Wheel, 36-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A140000004689A3500000———0
    8"3,4503/45/8"220V AC/440V ACWire LeadsThreeToggle1"2 1/2"Cast IronTotally Enclosed6036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A82000000———04689A84000000
    10"1,72511"120V AC/240V ACPlug InSingleToggle1"2 1/2"—Totally Enclosed12536-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A170000004689A3500000———0
    10"1,72511"220V AC/440V ACWire LeadsThreeToggle1"2 1/2"Cast IronTotally Enclosed11136-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4689A83000000———04689A8400000
     
    UL Listed, ANSI/UAMA B7.1, OSHA Compliant 29 CFR 1926.303
    6"3,4501/21/2"120V ACPlug InSingleRocker3/4"1 1/2"Cast IronTotally Enclosed3836-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A150000004600A1200000———0
    6"3,4501/21/2"120V ACPlug InSingleRocker3/4"2"Cast IronTotally Enclosed320.5" Wire Wheel Brush, 36-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A10000004600A1200000———0
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Stands
    Mounting
    Surface
    Material
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Includes
    Each
    For CSA Certified Grinders
    Iron31 3/4"10 5/8"10 5/8"59Tool Tray, Water Pot4689A260000000
     
    Replacement Eye Shields and Replacement Tool Rests
    Each
    Eye Shield for CSA Certified Bench Grinders4689A28000000
    Eye Shield for UL Listed Bench Grinders4600A1100000
    Left-Hand Replacement Tool Rest for CSA Certified Bench Grinders4689A3200000
    Right-Hand Replacement Tool Rest for CSA Certified Bench Grinders4689A3400000
    Left-Hand Replacement Tool Rest for UL Listed Bench Grinders4601A4100000
    Right-Hand Replacement Tool Rest for UL Listed Bench Grinders4601A4200000

    Electric Bench Buffer/Grinders

    Image of Product. Front orientation. Buffers and Polishers. Electric Bench Buffer/Grinders.
    Tackle various tasks with these tools that affix to your bench top. They have one wheel for buffing and polishing and another for tool cleaning and sharpening. Turn the dial to adjust speed. Higher speeds remove heavier defects, and lower speeds reduce the risk of damage to delicate surfaces.
    For Buffing and
    Polishing Wheel
    For
    Grinding Wheel
    Overall
    Max. Arbor
    Hole Dia.
    Max.
    Dia.
    Arbor Hole
    Dia.
    Max.
    Dia.
    Max.
    Thk.
    No-Load Rotational
    Speed, rpm
    Power,
    hp
    Motor Shaft
    Dia.
    Lg.
    Wd.
    Ht.
    Wt.,
    lb.
    Current
    (Voltage)
    Electrical
    Connection Type
    Includes
    Each
     
    Variable Speeds
    3/8"4"1/4"2"3/4"500 to 7,0001/65/16"13"5"5 1/8"81.8 amp (120V AC)Plug InWheel Arbor for Grinding Wheels
    1 3/4" Diameter Grinding Wheel
    3" Diameter Buffing and Polishing Wheel
    Tapered Spindle for Buffing and Polishing Wheels    		4755A60000000
     
    Replacements for Buffers and Polishers
    Each
    Replacement 3" Dia. Buffing and Polishing Wheel4755A6200000
    Replacement 1-3/4" Dia. Grinding Wheel4755A610000

    Heavy Duty Bench Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders.
    Image of Product. Grinder with Tool Tray, Two Adjustable Lighted Eye Shields, and Water Pot. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders, Two Adjustable Lighted Eye Shields, Water Pot, Tool Tray.

    Grinder with Tool Tray, Two

    Adjustable Lighted Eye

    Shields, and Water Pot

    Long-lasting lubricated ball bearings make these grinders good for continuous use.
    Use for bench grinding, tool sharpening, and buffing.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Fixed Speed
     
    UL Listed, CSA Certified, OSHA Compliant 29 CFR 1910.215
    7"3,6001/25/8"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed7036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A23000000000
    7"3,6001/25/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed7036-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A2500000000
    8"3,6003/43/4"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A2100000000
     
    UL Listed, OSHA Compliant 29 CFR 1910.215
    7"1,8001/25/8"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed7136-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A1600000000
    7"1,8001/25/8"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed8436-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A300000000
    7"3,6001/25/8"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed8436-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A400000000
    8"1,8003/43/4"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1100000000
    8"1,8003/43/4"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed11036-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A1100000000
    8"1,8003/43/4"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed9836-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1200000000
    8"3,6003/43/4"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed9936-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4601A1900000000
    8"3,6003/43/4"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed11136-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A1200000000
    10"1,80017/8"120V AC/240V ACWire LeadsSingleToggle1"3"IronTotally Enclosed13336-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A1500000000
    10"1,80017/8"120V AC/240V ACWire LeadsSingleToggle1"3"IronTotally Enclosed14536-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A2100000000
    10"1,8001 1/27/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed13436-grit Grinding Wheel, 60-grit Grinding Wheel, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers, Vented-Exhaust Wheel Guard4602A2100000000
    10"1,8001 1/27/8"208V AC to 230V AC/460V ACWire LeadsThreeToggle1"3"IronTotally Enclosed14636-grit Grinding Wheel, 60-grit Grinding Wheel, Tool Tray, Two Adjustable Lighted Eye Shields, Two Adjustable Tool Rests and Supports, Two Spark Breakers, Vented-Exhaust Wheel Guard, Water Pot4452A2200000000
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Each
    1 ½-pint Water Pot with Swivel Arm and Mounting Bracket4366A12000000
    Replacement Tool Rest for 7" Grinders4601A6200000
    Replacement Tool Rest for 8" and 10" Grinders4601A6400000
    Replacement Tool Rest Support for 7" Bench Grinders4601A28600000
    Replacement Tool Rest Support for 8" Bench Grinders4601A40600000
    Replacement Tool Rest Support for 10" Bench Grinders4601A67800000

    Heavy Duty Bench Grinders with Wire Brush

    Image of Product. Grinder with Wire Brush. Front orientation. Bench and Pedestal Grinders. Heavy Duty Bench Grinders with Wire Brush.

    Grinder with Wire Brush

    In addition to bench grinding and tool sharpening, this grinder has a wire brush for buffing, polishing, and removing rust and scale.
    Grinder has long-lasting lubricated ball bearings that are good for continuous use.
    Caution: Only use accessories that have a greater rpm rating than the maximum speed of the grinder you choose.
    120V AC/240V AC—The 120/240-volt models are wired for 120-volt service.
    For Wheel
    Dia.
    Max. Rotation
    Speed, rpm
    Power,
    hp
    For Arbor
    Hole Dia.
    Voltage
    Electrical
    Connection
    Electrical
    Phase
    Switch
    Type
    Wheel
    Thk.
    Vent
    Dia.
    Material
    Motor Enclosure
    Type
    Wt.,
    lb.
    Includes
    Each
    Fixed Speed
     
    UL Listed, OSHA Compliant 29 CFR 1910.215
    7"3,6001/25/8"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed6836-grit Grinding Wheel, 0.014" Wire Wheel Brush, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A2000000000
    8"3,6003/43/4"120V AC/240V ACPlug InSingleToggle1"3"IronTotally Enclosed9736-grit Grinding Wheel, 0.014" Wire Wheel Brush, Two Adjustable Tool Rests and Supports, Two Eye Shields, Two Spark Breakers4600A300000000
     
    Accessories and Replacements for Bench and Pedestal Grinders
    Each
    1 ½-pint Water Pot with Swivel Arm and Mounting Bracket4366A12000000
    Replacement Tool Rest for 7" Grinders4601A6200000
    Replacement Tool Rest for 8" and 10" Grinders4601A6400000
    Replacement Tool Rest Support for 7" Bench Grinders4601A28600000
    Replacement Tool Rest Support for 8" Bench Grinders4601A40600000

    Pedestal Grinders

    Image of Product. Front orientation. Bench and Pedestal Grinders. Pedestal Grinders.
    Pedestal grinders let you mount your grinder to work at a comfortable height.
    Grinders have overload-protected manual starters.
    Pedestal
    Base
    Power,
    hp
    Max. Rotation
    Speed, rpm
    Voltage
    Electrical
    Phase
    Wired for
    Voltage, V AC
    For Wheel
    Dia.
    For Wheel
    Thk.
    For Arbor
    Hole Dia.
    Switch
    Type
    Speed Control
    Type
    Vent
    Dia.
    Material
    Material
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Certification
    Specs. Met
    Each
    21,800120V AC/240V ACSingle12012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470—OSHA Compliant 29 CFR 1910.215
    		4606A41000000000
    21,800208V AC to 230V AC/460V ACThree24012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470CSA Certified
    		OSHA Compliant 29 CFR 1910.215
    		4606A5100000000
    31,800208V AC to 230V AC/460V ACThree24012"2"1 1/4"ToggleFixed4"SteelIron30"20"17"470CSA Certified
    		OSHA Compliant 29 CFR 1910.215
    		4606A6100000000
    Accessories and Replacements for Bench and Pedestal Grinders
    Replacement Water Pot4603A8 Each 0000000
    Dust Collector4578A54 Each 00000000
    Replacement 60-Watt Bulb for Lighted Eye Shields1796N16 Pkg. of 4 00000
    Replacement Lighted Eye Shield4604A2 Each 000000
    Replacement Tool Rest Support for 12" Pedestal Grinders4606A601 Each 00000
    Replacement Tool Rest for 12" Pedestal Grinders4606A464 Each 000000
    back to top