Mounting-Plate-End Sleeve-Grip Wire Rope End Fittings—Not for Lifting
Create a wire rope railing, perimeter, or barrier. To install, mount the fitting to a wall or post, then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench. The plate has swivel ends. Made of 316 stainless steel, these are the most corrosion resistant fittings we offer.
Warning: Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
For technical drawings and 3-D models, click on a part number.
For Wire Rope | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| End Type | Dia. | Construction | Overall Lg. | Max. Pivot Angle | Sleeve Dia. | Number of Mounting Holes | For Screw Size  | Mounting Fasteners Included | Capacity | Each | |
316 Stainless Steel | |||||||||||
| Swiveling | 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | 2 1/4" | 45° | 13/32" | 3 | No. 8 | Yes | 80% of the Rope's Capacity | 000000 | 000000 |
Closed-Body Mounting-Plate-to-Wire Rope Turnbuckles—Not for Lifting
Create a wire rope railing, perimeter, or barrier. These turnbuckles have a closed body that protects them from damage and debris and keeps them slim enough to fit in tight spaces. All are 316 stainless steel, so they have excellent resistance to chemicals and salt water.
Turnbuckles with a sleeve grip fitting have a mounting plate with swivel ends. To install, mount the turnbuckle to a wall or post. Then unscrew the fitting, slide over the wire rope, and tighten the pieces together with a wrench.
Warning: Turnbuckles must match rope diameter and be installed correctly to obtain maximum holding power. Test all assemblies for required strength before use. Do not use with coated rope unless the coating is removed.
Note: Capacities listed are for in-line pulling only.
For technical drawings and 3-D models, click on a part number.
Mounting Plate | For Wire Rope | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Retracted Lg. | Max. Adjustment | Extended Lg. | Lg. | Wd. | Movement | Dia. | Construction | Wire Rope Fitting Type | No. of Mounting Holes | Mounting Hole Dia. | Mounting Fasteners Included | Thread Size | Each | |
316 Stainless Steel Body with 316 Stainless Steel Fittings | |||||||||||||||
| 70% of the Rope's Capacity | 4 1/16" | 1 3/8" | 5 7/16" | 1 1/2" | 1 1/2" | 360° Swivel | 5/32" | 1 × 19 Strand Core 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 3 | 0.164" | Yes | 1/4"-28 | 000000 | 000000 |
| 70% of the Rope's Capacity | 6 7/8" | 2 1/2" | 9 3/8" | 2 1/8" | 5/8" | 360° Swivel | 1/8" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.244" | Yes | 1/4"-28 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 7 3/4" | 3" | 10 3/4" | 2 13/16" | 13/16" | 360° Swivel | 3/16" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.318" | Yes | 5/16"-24 | 0000000 | 00000 |
| 70% of the Rope's Capacity | 9" | 3 7/16" | 12 7/16" | 3 1/16" | 7/8" | 360° Swivel | 1/4" | 1 × 19 Strand Core 7 × 7 IWRC 7 × 7 Strand Core 7 × 19 IWRC 7 × 19 Strand Core | Sleeve Grip | 2 | 0.394" | Yes | 3/8"-24 | 0000000 | 00000 |