System of Measurement System of Measurement |
|---|
|
For Rope Diameter For Rope Diameter |
|---|
|
|
|
OD OD |
|---|
Capacity Capacity |
|---|
Bearing Type Bearing Type |
|---|
|
Width Width |
|---|
Application Application | Show |
|---|
|
Application Application | Hide |
|---|
|
|
Pulley Diameter Pulley Diameter |
|---|
Length Length |
|---|
Overall Height Overall Height |
|---|
|
Insertion Style Insertion Style |
|---|
|
Bearing Material Bearing Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Pulleys
More
Pulleys for Wire Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing. Ball bearings and needle-roller bearings allow for easier turns than sleeve bearings.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | ||
With Sleeve Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| C | 1/4" | 950 | 3" | 2 3/8" | 3/8" | 9/16" | Iron | 0000000 | 000000 |
| C | 3/8" | 1,250 | 3" | 2 1/4" | 3/8" | 13/16" | Iron | 0000000 | 00000 |
| C | 3/8" | 2,000 | 4" | 3 1/4" | 3/4" | 13/16" | Iron | 0000000 | 000000 |
| E | 1/2" | 3,000 | 5" | 3 7/8" | 3/4" | 1 1/16" | Iron | 0000000 | 000000 |
| E | 7/8" | 4,300 | 5 7/8" | 4 3/8" | 1 1/2" | 1 3/4" | Steel | 0000000 | 000000 |
| F | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 1/4" | 13/16" | Stainless Steel | 00000000 | 00000 |
| F | 3/16" | 1,000 | 2" | 1 1/2" | 3/8" | 9/16" | Stainless Steel | 000000000 | 00000 |
| F | 3/16" | 1,500 | 3 1/4" | 2 3/4" | 3/8" | 15/16" | Stainless Steel | 00000000 | 00000 |
| F | 1/4" | 1,500 | 2 1/2" | 1 7/8" | 5/8" | 11/16" | Stainless Steel | 000000000 | 00000 |
| F | 1/4" | 3,000 | 4 1/4" | 3 1/2" | 1/2" | 1 1/8" | Stainless Steel | 00000000 | 000000 |
| F | 5/16" | 5,000 | 5 1/4" | 4 3/8" | 1/2" | 1 3/8" | Stainless Steel | 00000000 | 000000 |
| F | 3/8" | 8,000 | 6 1/4" | 5 1/4" | 1/2" | 1 5/8" | Stainless Steel | 00000000 | 000000 |
With Ball Bearing | |||||||||
| A | 1/32" | 10 | 5/8" | 1/2" | 1/8" | 1/8" | Nylon Plastic | 0000000 | 00000 |
| A | 3/64" | 10 | 3/4" | 5/8" | 1/8" | 3/16" | Nylon Plastic | 0000000 | 00000 |
| A | 3/64" | 90 | 1 1/16" | 7/8" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| A | 3/32" | 90 | 1 1/2" | 1 1/4" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
| C | 1/16" | 90 | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| C | 1/8" | 90 | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 410 | 2" | 1 1/2" | 3/8" | 1/2" | Steel | 00000000 | 00000 |
| F | 1/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| F | 3/16" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 000000 |
| F | 1/4" | 1,200 | 4 1/4" | 3 1/2" | 1/2" | 1 1/16" | Stainless Steel | 0000000 | 000000 |
| G | 3/64" | 35 | 1/2" | 3/8" | 1/8" | 3/16" | Steel | 0000000 | 0000 |
| G | 3/32" | 175 | 1 1/16" | 7/8" | 3/16" | 5/16" | Steel | 0000000 | 0000 |
| G | 1/8" | 125 | 1" | 3/4" | 3/16" | 3/8" | Steel | 0000000 | 0000 |
| G | 3/16" | 175 | 1 1/4" | 7/8" | 1/4" | 7/16" | Steel | 0000000 | 0000 |
| G | 1/4" | 275 | 1 3/4" | 1 1/4" | 3/8" | 1/2" | Steel | 0000000 | 0000 |
| H | 3/16" | 85 | 1 1/4" | 1" | 5/32" | 7/16" | Steel | 0000000 | 00000 |
| H | 7/32" | 300 | 2 3/4" | 2 3/16" | 5/8" | 9/16" | Steel | 0000000 | 00000 |
| H | 11/32" | 300 | 2 3/4" | 2 3/8" | 3/8" | 9/16" | Steel | 0000000 | 00000 |
| H | 11/32" | 300 | 3" | 2 3/8" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
| H | 3/8" | 300 | 2 7/8" | 2 9/16" | 1/4" | 1/2" | Steel | 0000000 | 00000 |
| H | 3/8" | 300 | 3 1/16" | 2 9/16" | 3/8" | 1/2" | Steel | 0000000 | 00000 |
| H | 3/8" | 450 | 4 1/16" | 3 9/16" | 3/8" | 3/4" | Steel | 0000000 | 00000 |
| H | 7/16" | 325 | 3 3/8" | 2 11/16" | 3/8" | 11/16" | Steel | 0000000 | 00000 |
| H | 1/2" | 275 | 3" | 2 5/8" | 5/16" | 3/4" | Steel | 0000000 | 00000 |
| H | 17/32" | 300 | 2 7/8" | 2 1/4" | 1/2" | 13/16" | Steel | 0000000 | 00000 |
With Needle-Roller Bearing | |||||||||
| C | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 00000 |
| C | 3/16" | 800 | 2 1/2" | 2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
| C | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| C | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| C | 3/8" | 1,600 | 3" | 2 9/16" | 1/2" | 5/8" | Nylon Plastic | 00000000 | 00000 |
| D | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
Without Bearing | |||||||||
| A | 1/32" | Not Rated | 3/8" | 5/16" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 0000 |
| A | 1/32" | Not Rated | 5/8" | 1/2" | 1/8" | 1/8" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 3/4" | 5/8" | 1/8" | 3/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 1" | 13/16" | 3/16" | 3/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/64" | Not Rated | 1 1/16" | 7/8" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
| A | 1/16" | Not Rated | 1 1/4" | 1 1/16" | 3/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
| A | 3/32" | Not Rated | 1 1/2" | 1 1/4" | 1/4" | 9/32" | Acetal Plastic | 0000000 | 0000 |
| A | 3/32" | 200 | 2 1/2" | 2 3/16" | 1/4" | 1/4" | Nylon Plastic | 0000000 | 0000 |
| A | 1/8" | Not Rated | 1 3/4" | 1 3/8" | 1/4" | 5/16" | Acetal Plastic | 0000000 | 0000 |
| A | 3/16" | Not Rated | 1 9/16" | 1 1/4" | 1/4" | 3/8" | Acetal Plastic | 0000000 | 0000 |
| A | 3/16" | 800 | 3" | 2 1/2" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
| A | 3/16" | 800 | 3 1/2" | 3" | 1/2" | 7/16" | Nylon Plastic | 0000000 | 0000 |
| A | 1/4" | Not Rated | 1 3/4" | 1 3/16" | 1/4" | 7/16" | Nylon Plastic | 00000000 | 0000 |
| A | 1/4" | Not Rated | 1 15/16" | 1 9/16" | 5/16" | 7/16" | Acetal Plastic | 0000000 | 0000 |
| A | 1/4" | 1,400 | 4" | 3 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| A | 1/4" | 1,400 | 4 1/2" | 3 7/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| A | 1/4" | 1,400 | 5" | 4 3/8" | 3/4" | 1/2" | Nylon Plastic | 0000000 | 00000 |
| B | 5/16" | 1,600 | 5 1/2" | 4 5/8" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
| B | 5/16" | 1,600 | 6" | 5 1/4" | 3/4" | 5/8" | Nylon Plastic | 0000000 | 00000 |
Mounted Pulleys for Wire Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Stainless steel is more corrosion resistant than steel.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
Single-Groove Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 2" | 1" | 3 1/4" | 2 1/2" | Steel | Steel | 2 | 1/4" | 2 1/4" | __ | 0000000 | 000000 |
| 1 | 3/8" | Not Rated | 3" | 1 5/32" | 4 3/4" | 3 1/2" | Steel | Steel | 2 | 1/4" | 3 5/8" | __ | 0000000 | 00000 |
| 2 | 3/16" | Not Rated | 2 1/2" | 1 3/32" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 3/16" | 7/16" | 0000000 | 00000 |
| 2 | 1/4" | Not Rated | 3 1/4" | 1 7/16" | 4 3/4" | 3 3/8" | Steel | Steel | 4 | 1/4" | 4 1/8" | 13/16" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 4 1/2" | 1 5/8" | 6 5/16" | 4 3/4" | Steel | Steel | 4 | 1/4" | 5 1/2" | 13/16" | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 2" | 7/8" | 4 1/8" | 15/16" | Steel | Steel | 4 | 1/4" | 3 7/16" | 13/16" | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 3" | 1 1/8" | 5 9/16" | 1 1/8" | Steel | Steel | 4 | 1/4" | 4 3/4" | 1 1/16" | 0000000 | 00000 |
| 4 | 3/16" | Not Rated | 2 1/2" | 15/16" | 4" | 2 1/2" | Steel | Steel | 4 | 3/16" | 3 1/2" | 9/16" | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 3 1/4" | 1 1/16" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 3/8" | 13/16" | 0000000 | 00000 |
| 4 | 3/8" | Not Rated | 4 1/2" | 1 1/8" | 7" | 4 1/2" | Steel | Steel | 4 | 1/4" | 6 1/4" | 3/4" | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
| 5 | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 1 3/4" | Steel | Stainless Steel | 3 | 3/16" | __ | __ | 0000000 | 00000 |
Double-Groove Without Bearing | ||||||||||||||
| 6 | 3/16" | Not Rated | 2 1/2" | 1 7/16" | 3 3/4" | 2 3/4" | Steel | Steel | 4 | 3/16" | 3 1/4" | 7/8" | 0000000 | 00000 |
| 6 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/2" | Steel | Steel | 4 | 1/4" | 4 1/8" | 1 1/16" | 0000000 | 00000 |
| 7 | 1/4" | Not Rated | 3 1/4" | 1 7/8" | 5" | 3 1/4" | Steel | Steel | 4 | 3/16" | 4 7/16" | 3/4" | 0000000 | 00000 |
Hanging Pulleys for Wire Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is corrosion resistant. Stainless steel is the most corrosion resistant.
Pulley with carabiner can mount to steel framing or hang as part of your rigging system.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | ||
Single-Groove Without Bearing | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Eye | ||||||||||||
| A | 1/4" | 150 | 1 3/8" | 9/16" | 1 3/8" | 2 13/16" | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 0000000 | 000000 |
| A | 1/2" | 1,650 | 2" | 1 5/16" | 2" | 4 7/8" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| A | 9/16" | 2,475 | 3" | 1 5/16" | 3" | 7" | 15/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| A | 5/8" | 4,175 | 4" | 1 1/2" | 4" | 8" | 15/16" | 1/2" | Stainless Steel | Stainless Steel | 0000000 | 000000 |
Single-Groove With Bearing | ||||||||||||
Swivel Eye | ||||||||||||
| A | 3/16" | 150 | 1 1/4" | 9/16" | 1 1/4" | 2 3/4" | 3/8" | 3/16" | Steel | Stainless Steel | 0000000 | 00000 |
| B | 1/2" | 2,000 | 4 1/2" | 2 1/4" | 4 1/2" | 8 7/8" | 1 1/4" | 1/2" | Steel | Steel | 0000000 | 000000 |
Rigid Carabiner | ||||||||||||
| C | 3/16" | 900 | 3 3/8" | 1 3/16" | 4" | 7 3/8" | 3/4" | 5/16" | Nylon Plastic | Aluminum | 0000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||
Swivel Eye | ||||||||||||
| D | 5/16" | 1,100 | 1" | 1 31/32" | 1" | 3 3/4" | 1/2" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| D | 5/16" | 1,250 | 1 1/4" | 2 1/32" | 1 1/4" | 4 1/2" | 9/16" | 1/4" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| D | 7/16" | 1,850 | 2" | 2 29/64" | 2" | 5 1/2" | 3/4" | 5/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Easy-Open Hanging Pulleys for Wire Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it’s easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Hook Opening Wd. | Hook Thick. | Eye Dia. | Eye Thick. | Material | Housing Material | Each | |
Without Bearing | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Swivel Latching Hook | ||||||||||||||
| A | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 10 5/16" | 1" | 3/4" | __ | __ | Steel | Steel | 0000000 | 0000000 |
| A | 1/2" | 8,000 | 4 1/2" | 2 1/16" | 4 1/2" | 14 3/4" | 1 5/16" | 1 1/16" | __ | __ | Steel | Steel | 0000000 | 000000 |
Swivel Shackle | ||||||||||||||
| B | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 10 3/8" | __ | __ | 1 1/4" | 1/2" | Steel | Steel | 0000000 | 000000 |
| B | 1/2" | 8,000 | 4 1/2" | 2 3/8" | 4 1/2" | 15 5/16" | __ | __ | 1 13/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
| B | 3/4" | 16,000 | 6" | 2 3/8" | 6" | 20 3/16" | __ | __ | 2 1/2" | 1" | Steel | Steel | 0000000 | 00000000 |
Rigid Clevis | ||||||||||||||
| C | 3/8" | 4,000 | 3" | 1 1/2" | 3" | 4 7/8" | __ | __ | __ | __ | Steel | Steel | 0000000 | 000000 |
| C | 1/2" | 8,000 | 4 1/4" | 2" | 4 1/4" | 7 3/4" | __ | __ | __ | __ | Steel | Steel | 0000000 | 000000 |
Rigid Eye | ||||||||||||||
| D | 1/8" | 975 | 1" | 7/16" | 1" | 2 5/8" | __ | __ | 3/8" | 1/8" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
| D | 1/4" | 1,850 | 1 3/4" | 1/2" | 1 3/4" | 3 1/4" | __ | __ | 3/8" | 3/16" | Nylon Plastic | Stainless Steel | 00000000 | 00000 |
Hanging Pulleys for Rope—For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about half the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Styles C, H, and P have a bracket on the bottom for tying off one end of a rope.
Style J reduce the force needed to hold your load in place. Unlike standard pulleys, these have a V-groove for more grip on your rope, and they ratchet when under load so they won't slip in the other direction. Pulley for 3/8" dia. rope can be set to ratchet even when not under load.
For technical drawings and 3-D models, click on a part number.
| Style | For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Hook Opening Wd. | Hook Thick. | Material | Housing Material | Each | |
Single-Groove Without Bearing | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | ||||||||||||||
| A | 3/16" | Not Rated | 3/4" | 1/2" | 3/4" | 2 1/16" | 1/4" | 1/4" | __ | __ | Aluminum | Aluminum | 0000000 | 000000 |
| A | 1/4" | Not Rated | 1" | 3/4" | 1" | 2 5/8" | 3/8" | 1/4" | __ | __ | Bronze | Bronze | 0000000 | 00000 |
| A | 5/16" | Not Rated | 1 3/8" | 7/8" | 1 3/8" | 3 1/8" | 1/2" | 1/4" | __ | __ | Aluminum | Aluminum | 0000000 | 00000 |
| A | 3/8" | Not Rated | 1 1/2" | 1" | 1 1/2" | 3 5/16" | 1/2" | 5/16" | __ | __ | Bronze | Bronze | 0000000 | 00000 |
| A | 3/8" | Not Rated | 1 1/2" | 1" | 1 1/2" | 3 1/2" | 9/16" | 5/16" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 1/2" | Not Rated | 2" | 1 1/8" | 2" | 4 1/2" | 11/16" | 3/8" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 5/8" | Not Rated | 2 1/2" | 1 3/8" | 2 1/2" | 5 5/16" | 7/8" | 3/8" | __ | __ | Iron | Iron | 0000000 | 00000 |
| A | 3/4" | Not Rated | 3" | 1 5/8" | 3" | 6 1/4" | 15/16" | 1/2" | __ | __ | Iron | Iron | 0000000 | 00000 |
| E | 3/16" | 325 | 3/4" | 3/8" | 3/4" | 1 3/8" | 3/16" | 1/8" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| E | 5/16" | 650 | 1 1/8" | 1/2" | 1 1/8" | 2" | 3/16" | 1/2" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
Rigid Latching Hook | ||||||||||||||
| C | 5/8" | 1,200 | 3" | 1 1/4" | 3" | 11 7/8" | __ | __ | 3/4" | 11/16" | Steel | Steel | 0000000 | 000000 |
| C | 3/4" | 1,800 | 3 1/2" | 1 11/16" | 3 1/2" | 13 1/4" | __ | __ | 1 1/16" | 13/16" | Steel | Steel | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
| B | 5/32" | 25 | 1/2" | 1/2" | 1/2" | 1 3/4" | 1/4" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 3/16" | 30 | 3/4" | 1/2" | 3/4" | 2 1/4" | 3/8" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 1/4" | 30 | 1" | 5/8" | 1" | 2 1/2" | 3/8" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 5/16" | 50 | 1 1/2" | 3/4" | 1 1/2" | 3 1/2" | 5/8" | 1/4" | __ | __ | Iron | Iron | 0000000 | 0000 |
| B | 7/16" | 55 | 2" | 7/8" | 2" | 4 1/4" | 11/16" | 1/4" | __ | __ | Iron | Iron | 0000000 | 0000 |
| K | 1/4" | 400 | 1 1/4" | 7/8" | 1 1/4" | 3 1/4" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| K | 5/16" | 600 | 1 3/4" | 15/16" | 1 3/4" | 3 7/8" | 5/8" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| K | 3/8" | 1,000 | 2 1/4" | 1 1/16" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Shackle | ||||||||||||||
| F | 1/4" | 325 | 1" | 1/2" | 1" | 2 1/8" | 1/4" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| G | 7/16" | 875 | 1 9/16" | 3/4" | 1 9/16" | 3 1/2" | 1/2" | 3/16" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| G | 1/2" | 1,650 | 2" | 1" | 2" | 4" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| H | 1/2" | 1,650 | 2" | 1" | 2" | 5" | 1/2" | 1/4" | __ | __ | Acetal Plastic | Stainless Steel | 0000000 | 00000 |
| J | 5/16" | 375 | 1 9/16" | 13/16" | 1 9/16" | 3 1/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
| J | 3/8" | 550 | 2 3/16" | 15/16" | 2 3/16" | 3 7/8" | 3/8" | 3/16" | __ | __ | Aluminum | Nylon Plastic | 0000000 | 00000 |
Swivel Hook | ||||||||||||||
| L | 3/8" | 750 | 2" | 1 1/8" | 2" | 5 1/2" | __ | __ | 9/16" | 7/16" | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Single-Groove With Bearing | ||||||||||||||
Swivel Eye | ||||||||||||||
| D | 1 1/4" | 2,000 | 4 1/2" | 2 1/4" | 4 1/2" | 8 5/8" | 1 1/4" | 1/2" | __ | __ | Steel | Steel | 00000000 | 000000 |
Double-Groove Without Bearing | ||||||||||||||
Rigid Eye | ||||||||||||||
| N | 3/8" | Not Rated | 1 1/2" | 1 5/8" | 1 1/2" | 3 1/2" | 1/2" | 5/16" | __ | __ | Steel | Steel | 0000000 | 00000 |
| N | 1/2" | Not Rated | 2" | 1 13/16" | 2" | 4 9/16" | 11/16" | 5/16" | __ | __ | Steel | Steel | 0000000 | 00000 |
Rigid Latching Hook | ||||||||||||||
| Q | 1/2" | 1,400 | 2 1/4" | 2" | 2 1/4" | 11 1/2" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
| Q | 5/8" | 1,800 | 3" | 3" | 3" | 12 7/8" | __ | __ | 1 1/16" | 3/4" | Steel | Steel | 0000000 | 000000 |
| Q | 3/4" | 2,500 | 3 1/2" | 3" | 3 1/2" | 14" | __ | __ | 1 1/16" | 15/16" | Steel | Steel | 0000000 | 000000 |
Swivel Eye | ||||||||||||||
| M | 3/16" | Not Rated | 7/8" | 1 1/4" | 7/8" | 2 1/2" | 9/16" | 3/16" | __ | __ | Iron | Iron | 0000000 | 0000 |
| M | 5/16" | Not Rated | 1 5/16" | 1 5/8" | 1 5/16" | 3 5/8" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
| M | 3/8" | Not Rated | 1 13/16" | 1 13/16" | 1 13/16" | 4 1/4" | 3/4" | 1/4" | __ | __ | Iron | Iron | 0000000 | 00000 |
| R | 1/4" | 400 | 1 1/4" | 1 1/2" | 1 1/4" | 3 1/4" | 9/16" | 1/4" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| R | 5/16" | 600 | 1 3/4" | 1 3/4" | 1 3/4" | 3 7/8" | 5/8" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
| R | 3/8" | 1,000 | 2 1/4" | 2" | 2 1/4" | 5" | 13/16" | 5/16" | __ | __ | Stainless Steel | Stainless Steel | 0000000 | 00000 |
Swivel Latching Hook | ||||||||||||||
| P | 1/2" | 1,000 | 2" | 2 3/8" | 2" | 11 1/4" | __ | __ | 7/8" | 9/16" | Nylon Plastic | Nylon Plastic | 000000 | 000000 |
Mounted Pulleys for Rope—For Horizontal Pulling
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum and nylon are lightweight and corrosion resistant. Stainless steel has the most corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Mounting Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Material | Housing Material | No. of | Dia. | Ctr.-to-Ctr. (A) | Ctr.-to-Ctr. (B) | Each | ||
With Ball Bearing | ||||||||||||||
| 7 | 3/8" | 1,100 | 2 3/16" | 15/16" | 3 1/8" | 2 13/16" | Nylon Plastic | Nylon Plastic | 2 | 1/4" | 2 3/16" | __ | 0000000 | 000000 |
Without Bearing | ||||||||||||||
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Bronze | Bronze | 2 | 5/32" | 1 3/8" | __ | 0000000 | 00000 |
| 1 | 1/4" | Not Rated | 11/16" | 7/8" | 1 7/8" | 1 1/8" | Steel | Steel | 2 | 5/32" | 1 3/8" | __ | 000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Bronze | Bronze | 4 | 17/64" | 1 3/8" | 1 3/4" | 0000000 | 00000 |
| 2 | 3/8" | Not Rated | 1 1/2" | 2 1/2" | 2 1/8" | 2 1/8" | Steel | Steel | 4 | 17/64" | 1 3/8" | 1 3/4" | 000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 1/8" | 13/16" | Steel | Steel | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 1/4" | Not Rated | 1 1/8" | 3/4" | 3 3/16" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 1/2" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 3/4" | 3 5/8" | 13/16" | Aluminum | Aluminum | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 5/16" | Not Rated | 1 3/8" | 13/16" | 3 9/16" | 13/16" | Steel | Steel | 2 | 3/16" | 2 7/8" | __ | 0000000 | 00000 |
| 3 | 3/8" | Not Rated | 1 1/2" | 1" | 3 11/16" | 1" | Steel | Steel | 2 | 3/16" | 3" | __ | 0000000 | 00000 |
| 4 | 1/4" | Not Rated | 1" | 1 5/8" | 1 5/8" | 3 1/2" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 5/16" | Not Rated | 1 1/4" | 1 5/8" | 1 5/8" | 4 5/16" | Iron | Iron | 4 | 11/64" | 1" | 1" | 000000 | 00000 |
| 4 | 3/8" | Not Rated | 1 1/2" | 2 3/16" | 2 3/16" | 4 5/8" | Iron | Iron | 4 | 1/4" | 1 3/16" | 1 3/16" | 000000 | 00000 |
| 5 | 3/8" | Not Rated | 1 1/2" | 7/8" | 2 15/16" | 2 1/16" | Steel | Steel | 2 | 15/64" | 2 1/8" | __ | 000000 | 00000 |
| 5 | 5/8" | Not Rated | 2 1/2" | 1 1/4" | 4 5/8" | 3 5/16" | Steel | Steel | 2 | 9/32" | 3 1/2" | __ | 000000 | 00000 |
| 6 | 5/16" | Not Rated | 1 3/8" | 7/8" | 2 9/16" | 1 13/16" | Steel | Steel | 2 | 13/64" | 1 13/16" | __ | 000000 | 0000 |
| 6 | 1/2" | Not Rated | 2" | 1 1/16" | 3 1/2" | 2 5/8" | Steel | Steel | 2 | 15/64" | 2 5/8" | __ | 000000 | 00000 |
| 8 | 1/2" | 1,750 | 2" | 7/8" | 2 3/4" | 2 1/2" | Nylon Plastic | Stainless Steel | 2 | 1/4" | 2 3/16" | __ | 0000000 | 00000 |
Pulleys for Rope—For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Acetal and aluminum are lightweight and corrosion resistant. Galvanized steel is more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Pulley Dia. | For Shaft Dia. | Wd. | Material | Each | |
With Ball Bearing | ||||||||
|---|---|---|---|---|---|---|---|---|
| 1/4" | 300 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 000000 |
| 3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| 1/2" | 1,200 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 000000 |
| 5/8" | 2,500 | 4 1/4" | 3 5/8" | 5/8" | 1 1/16" | Stainless Steel | 0000000 | 000000 |
With Needle-Roller Bearing | ||||||||
| 1/2" | Not Rated | 2" | 1 5/8" | 3/8" | 5/8" | Aluminum | 00000000 | 00000 |
| 5/8" | Not Rated | 4" | 3 3/8" | 5/8" | 13/16" | Aluminum | 00000000 | 000000 |
Without Bearing | ||||||||
| 3/16" | Not Rated | 3/4" | 9/16" | 5/16" | 1/4" | Acetal Plastic | 0000000 | 0000 |
| 3/16" | Not Rated | 2 5/8" | 2" | 5/16" | 1/2" | Acetal Plastic | 0000000 | 00000 |
| 1/4" | 400 | 1 1/4" | 1" | 1/4" | 1/2" | Stainless Steel | 0000000 | 00000 |
| 5/16" | 600 | 1 3/4" | 1 7/16" | 1/4" | 5/8" | Stainless Steel | 0000000 | 00000 |
| 3/8" | 1,000 | 2 1/4" | 1 7/8" | 3/8" | 13/16" | Stainless Steel | 0000000 | 00000 |
| 7/16" | 1,500 | 3 1/4" | 2 13/16" | 1/4" | 15/16" | Stainless Steel | 0000000 | 00000 |
| 1/2" | Not Rated | 2" | 1 5/8" | 3/8" | 5/8" | Aluminum | 00000000 | 00000 |
| 1/2" | 1,000 | 2 1/4" | 1 15/16" | 3/8" | 5/8" | Steel | 0000000 | 00000 |
| 1/2" | 1,500 | 3 1/4" | 2 3/4" | 1/2" | 15/16" | Stainless Steel | 0000000 | 00000 |
| 9/16" | 3,000 | 4 1/4" | 3 11/16" | 3/8" | 1 1/8" | Stainless Steel | 000000 | 00000 |
| 5/8" | Not Rated | 4" | 3 3/8" | 5/8" | 13/16" | Aluminum | 00000000 | 00000 |
| 5/8" | 1,250 | 3" | 2 11/16" | 3/8" | 3/4" | Galvanized Steel | 0000000 | 00000 |
| 5/8" | 3,000 | 4 1/4" | 3 5/8" | 1/2" | 1 1/8" | Stainless Steel | 0000000 | 000000 |
| 3/4" | 2,000 | 3 1/2" | 3" | 1/2" | 1" | Galvanized Steel | 0000000 | 00000 |
| 3/4" | 5,000 | 5 1/4" | 4 1/2" | 1/2" | 1 3/8" | Stainless Steel | 0000000 | 000000 |
| 1" | 3,000 | 4 3/4" | 4 3/16" | 5/8" | 1 1/8" | Iron | 0000000 | 000000 |
| 1" | 8,000 | 6 1/4" | 5 1/4" | 3/4" | 1 5/8" | Stainless Steel | 0000000 | 000000 |
Easy-Open Hanging Pulleys for Rope—For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it's easier to feed the rope through the housing—a free rope end is not needed. Use them to assist with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to turn than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless steel is more corrosion resistant than aluminum.
For technical drawings and 3-D models, click on a part number.
| For Rope Dia. | Capacity, lbs. | OD | Wd. | Overall Lg. | Overall Ht. | Eye Dia. | Eye Thick. | Material | Bearing Material | Each | |
With Needle-Roller Bearing | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Rigid Eye | |||||||||||
| 5/8" | Not Rated | 2 3/8" | 1 1/16" | 2 3/8" | 4 1/2" | 15/16" | 1/4" | Aluminum | Steel | 0000000 | 0000000 |
Without Bearing | |||||||||||
Rigid Eye | |||||||||||
| 1/2" | Not Rated | 2" | 7/8" | 2" | 5" | 3/4" | 1/4" | Aluminum | __ | 0000000 | 00000 |
Swivel Eye | |||||||||||
| 1/2" | 1,500 | 3 1/4" | 1 13/16" | 3 1/4" | 8 3/4" | 15/16" | 1/2" | Stainless Steel | __ | 00000000 | 000000 |
| 5/8" | 2,500 | 4 1/4" | 2 5/16" | 4 1/4" | 10 1/4" | 15/16" | 1/2" | Stainless Steel | __ | 00000000 | 000000 |