Paint metal surfaces to stop rust from starting and prevent existing rust from spreading.

Match the manufacturers' color of your forklift, lift truck, or pallet truck to cover scratches and wear.

This paint resists heat and automotive fluids for use on engines. Match the color to your manufacturers' equipment color.

Cover scratches and wear on storage racks and carts. Match the color to your manufacturers' equipment color.

This acrylic-lacquer paint produces a thick, durable finish that won’t run or drip as it dries.

Hide nicks and scratches on metal surfaces with this textured-finish paint. It stops rust from starting and prevents existing rust from spreading.

This paint leaves behind a stone-like texture. Use it to hide surface imperfections or to allow metal and wood fixtures to blend in with surrounding masonry and concrete.

Create a washable writing surface.

Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side.

Mark traffic lanes, parking lots, and factory floors.

Unlike other marking paint, this paint sprays in the upright position and dries fast, so it won't drip when applied overhead.

This paint adheres to most types of plastic without sanding or priming.

Restore existing water- and smoke-stained ceiling tiles to their original appearance.

Spray this paint onto trees, logs, or cut wood—even in the rain—to create a bright mark that can be seen at a distance.

This water-based paint sprays in an inverted position and will not harm grass or other plant life.

These coatings are some of the thickest and most durable on the market. They protect against abrasion and resist moisture and chemicals.

Keep working when temperatures drop—these coatings can be applied in temperatures down to 20° F, when other coatings would fail. Thicker than polyurethane and paint, they protect against abrasion and resist moisture and chemicals.

Some of the thickest and most durable on the market, these coatings have excellent abrasion and impact resistance. Often used as a topcoat over epoxy coatings, they provide superior UV resistance and have great color and gloss retention.

Designed for use in truck beds, these durable coatings create a tough, textured finish that prevents objects from sliding. Made from polyurethane, they resist abrasion and won’t fade from exposure to UV light.

Used to insulate, create grips, and color-code components, these coatings resist high temperatures, light abrasion, and corrosion.

Made with Viton® fluoroelastomer, use these coatings to create a flexible coating on rollers, heavy equipment, and anything else that’s exposed to corrosive chemicals or extreme temperatures.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Also known as coal tar epoxy, these coatings are our most resistant to abrasion, chemicals, and corrosion on concrete and steel. They can be immersed in salt water and fresh water.

Spray these thin coatings onto most types of metal, plastic, and glass for a washable coating that protects the underlying surface from scratches. They can be easily peeled off if removed within six months.

Use these coatings in kitchens, furnace areas, and ships on plastic, metal, wood, and masonry.

These polyurethane-based coatings resist moisture, corrosion, abrasion, and impact better than paint and have excellent color retention. They're often used as a topcoat over epoxy coatings.

Use these coatings on nonporous surfaces that need to withstand high-pressure washdowns. They contain 316 stainless steel flakes, which provide durability and superior corrosion and impact resistance.

These two-part epoxy coatings resist chemicals and other solvents.

Tough and long-lasting, these flexible coatings protect against rust and corrosion.

Protect metal with these low-odor, water-based, UV-resistant coatings. They contain 316 stainless steel flakes, which provide durability and superior corrosion resistance.

These flexible, slip-resistant silicone coatings resist chemicals, block UV light, and encapsulate lead paint. They withstand temperatures up to 320° F.

Protect metal parts from corrosion. Also known as rust-inhibiting film, these coatings can be removed with a simple degreaser or mineral spirits.

These coatings are more durable than our standard coatings for concrete floors. They provide a stain-resistant finish that protects your floors from moisture, chemicals, foot traffic, and hand carts.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Repel spills and block stains without changing the look of fabric or upholstery.

Reflect at least 85% of the sun's rays to reduce cooling costs. These coatings also restore and reinforce your roof by filling cracks and forming a water-resistant seal.

Made from silicone, these coatings are more durable than acrylic coatings for roofs and have better resistance to pooling water. They reflect up to 90% of the sun's rays to reduce cooling costs.

Add long-term corrosion protection to uncoated or rusty metal surfaces. These primers prepare your surface to extend the life of paint and coatings.

A high concentration of zinc gives these primers excellent corrosion resistance for protecting steel—when exposed to moisture and chemicals, the zinc rusts before the underlying steel can. They’re often used with structural steel.

These primers stand up to marine exposure and salt spray. Use them to prepare your surface to extend the life of paint and coatings.

Protect steel and iron parts from corrosion without having to remove the primer before welding them together. Often used on structural steel in demanding environments, these primers can be welded through without affecting the weld’s integrity.

Use these primers on metal surfaces in enclosed occupied areas, such as hospitals, schools, and offices. They have excellent resistance to moisture and corrosion and bond well to metal to extend the life of paint and coatings.

Use these primers in enclosed occupied areas, such as hospitals, schools, and offices. They cover stains and prepare your surface, extending the life of paint and coatings.

These primers fill surface cracks and are sandable for a smooth basecoat. Use them to prepare your surface to extend the life of paint and coatings.

These thin primers penetrate deeply into concrete floors to create a hard surface that can then be coated with any urethane or epoxy coating.

These primers have excellent adhesion to plastic. Use them to prepare your surface to extend the life of paint and coatings.

These thinners are acetone and naphtha based, so they're low odor. They're often used for cleanup and to thin paint for spray applications.

Avoid the fumes and strong smell of traditional thinners with these odorless thinners. They’re often used for cleanup and to thin paint for spray applications.

These thinners are often used for cleanup and to thin paint for spray applications.

These surface fillers can be used on vertical surfaces without sagging. They repair cracked, worn, and damaged surfaces.

Make castings and fill voids with these two-part pourable epoxies.

Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.

Repair and rebuild metal surfaces that are exposed to heat. These surface fillers withstand temperatures over 450° F.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Spray these compounds onto drywall to create an orange-peel texture that covers stains, patches, and chips. The nozzle adjusts from a light to heavy spray.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Fill cracks with these coatings to stop leaks and deaden sound.

Stain metal items such as bearings, springs, nuts, and other components.