When mixed into coatings, resins, polymers, and metals, these fillers enhance strength, conductivity, lubricity, and other physical properties.

From acid to xylene, these dry and liquid chemicals are useful in a wide range of industrial applications.

Highly pure, this green silicon carbide powder is consistent between batches and bonds better than less pure powders, yielding less cracking and wear in finished products.

Add color to your mixture when making ceramic, plastic, and rubber or when casting metal.

Diamond cuts more quickly, lasts longer, and leaves a finer finish than other lapping grains.

Produce complex metal parts quicker and with fewer tools and less wasted material than machining.

Sprinkle compound over a heated part, heat again, and cool in quenching fluid.

Made of graphite, these powders and flakes lubricate under heavy loads and high temperatures. They resist most chemicals and conduct heat and electricity. Use them dry or mix with oil and grease.

Often used in laboratories and food-processing environments, these enzyme-based cleaners remove biological contaminants, such as proteins and fats, with a higher degree of precision than other cleaners. They rinse away without leaving a residue.

Neutralize the pH of industrial wastewater to prepare it for disposal.

Cut through stuck-on food and grease for spotless dishes, glasses, and silverware.

Remove scale from water-cooled condensers, chillers, and non-potable water boilers.

Test metals for faulty seams, welding defects, and fatigue cracks, assuring they will be safe even under high stress. Unlike other flaw detectors that only find surface defects, magnetic particles also reveal imperfections slightly below the surface.

Mix with water to quickly rehydrate and replace carbohydrates and minerals.