We will reply to your message within an hour.
Press these feet into tubular legs of tables, chairs, and other furniture.
A swiveling base compensates for angled legs and uneven surfaces.
These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.
Use these feet on furniture with wood legs.
An integral cushion reduces noise and vibration.
Peel back the film to stick these feet to the bottom of furniture and equipment legs.
These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.
Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.
Screw these feet to the bottom of wood furniture legs.
Cover the bottom of furniture legs.
Place these feet under furniture and equipment.
Meant for light duty applications, these mounts are not rated for capacity.
Use these mounts on heavy machines and equipment.
Use these metric mounts on heavy machines and equipment.
These mounts have a cushion on top to provide padding between your furniture and the mount.
Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.
A hex nut at the base of the stud allows for easy height adjustment.
Protect surfaces from scratches and wear.
Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.
Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.
Made entirely of plastic, these mounts are resistant to oil and won't scratch your mounting surface.
Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.
Install these mounts on machines without feet.
Nickel-plated steel has some corrosion resistance.
Black-oxide steel has a dull shine for areas where appearance is a concern.
Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.
Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.
An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.
Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.
Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.
Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.
Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.
Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.
Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.
Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.
Ready for installation on the bottom of machines and equipment without feet, these mounts come with their own bracket.
Designed for use in sanitary and food processing areas, these mounts level tanks and machinery on uneven floors and create space to clean underneath.
Adjust the swivels on these mounts to level equipment on uneven surfaces for protection during earthquakes.
These mounts have fine threads that give you precise leveling control.
Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.
A two-piece design simplifies installation and requires less clearance than one-piece mounts.
Higher deflection ratings translate to greater vibration and shock isolation.
All-stainless steel construction stands up to water and chemicals and won't rust or corrode.
A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.
Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.
Bolt these mounts down to keep your equipment stationary.
Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.
Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.
Often used on furniture, the hood covers the wheel for a more finished appearance.
Create a seamless joint between the top of these casters and the bottom of most swivel chairs.
Also known as twin‐wheel casters, these lightweight and economical casters are often used on furniture and displays.
Wheels range from soft rubber that absorbs shock while providing good traction on rough surfaces, to hard, impact‐resistant rubber that rolls easily on smooth surfaces.
Also known as twin‐wheel casters, these lightweight and economical casters are commonly found on furniture and displays.
The most durable plastic wheel, the nylon wheels on these casters are impact and wear resistant. They work well on smooth surfaces. The wheels dissipate static to protect sensitive electronic equipment from electrostatic discharge.
Also known as twin-wheel casters, these lightweight casters are often used on furniture and displays.
Often used on creeper stools, these have a smooth-rolling angled wheel that creates a low profile.
Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.
Install these casters into a threaded hole. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.
This synthetic felt is an economical alternative to wool felt.
Made of 100% wool, this is the hardest felt we offer, yet it can still be used for polishing. It is more abrasion resistant and better at damping vibration than other felt. Includes S2-32, S2-24, and S2-20 felt grades.
Line toolboxes and drawers to cushion and protect small parts.