Filter by
For Holding
Overall Length
Face Type
For Use With
System of Measurement
Machine Taper Number
Approximate Diameter Compression
Shank Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Material
Mounting Slot Length
For Number of Collets
Mounting Slot Width
Number of Mounting Slots
Overall Depth
Overall Height
Overall Width
Mounting Location
100-TG Collets
Install into a 100-TG collet chuck or holder to tightly grip round-shank tool bits in milling machines.
For technical drawings and 3-D models, click on a part number.
| Collet Size | Workpiece Dia. Tolerance | Max. Body Dia. | Approximate Dia. Compression | Overall Lg. | Material | Each | |
Round | |||||||
|---|---|---|---|---|---|---|---|
| 1/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 000000 |
| 3/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1/4" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 5/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 3/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 7/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1/2" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 9/16" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 5/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 3/4" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 7/8" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
| 1" | -0.0003" to 0.0003" | 1.278" | 1/64" | 2.386" | Hardened Steel | 00000000 | 00000 |
Collet Chucks
CAT 40 Taper
Securely hold collets in the spindle of a milling machine.
Use a nut wrench (sold separately) to tighten the chuck nut and secure the tool bit in the collet.
For technical drawings and 3-D models, click on a part number.
100-TG Collet Stands
Overall | Mounting Slot | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Number of Collets | Ht. | Wd. | Dp. | No. of | Wd. | Lg. | Material | Each | |
| 27 | 2" | 9 1/8" | 17" | 2 | 1/4" | 1 1/16" | Steel | 0000000 | 000000 |