McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    12 Products

    Precise-Control Screwdriver Sets

    Make fine-tuned adjustments on a variety of small, delicate components, such as electronics, miniature models, and microscopes. These screwdriver sets give you better control than a standard screwdriver to avoid stripping tiny screws or cracking fragile materials. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.
    No. of
    Pieces
    Includes
    Grip
    Style
    Material
    Container
    Type
    Each
    Phillips, Slotted, Hex, and Torx
    505 3/4" Lg. Chip Lifter
    Hex Screwdrivers: 0.028", 0.035", 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
    Hex Screwdrivers: 1.27 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm
    Nutdrivers: 1.5 mm, 1.8 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm
    Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1
    Slotted Screwdrivers: 1/32", 0.039", 3/64", 1/16", 0.070", 5/64", 3/32", 1/8", 9/64", 5/32"
    Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10    		PlainChrome-Plated SteelMetal Stand52985A940000000
     

    Cushion-Grip Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdrivers. Cushion-Grip Screwdriver/Nutdrivers, 6 Sizes.
    Image of Product. Front orientation. Screwdrivers. Cushion-Grip Screwdriver/Nutdrivers, 11 Sizes.

    6 Sizes

    11 Sizes

    Image of Attribute. Front orientation. Cushion-Grip Screwdriver/Nutdrivers.

    An iconic rubberized grip ensures comfort and control as you turn screws and nuts. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to fasten nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Stubby—An extra-short handle and shaft squeeze behind mounted equipment and inside small panels.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Bolt
    Clearance
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Premium
    6Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Nutdriver: 1/4", 5/16"    		1/4", 5/16"Stubby3/4"3 3/8"1 1/4"17/32"Chrome-Plated SteelBall DetentKlein Tools6127A42000000
    6Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Nutdriver: 1/4", 5/16"    		1/4", 5/16"Long2 1/8"9 1/8"4 1/8"7/16"Chrome-Plated SteelBall DetentKlein Tools9830N1100000
    11Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Torx: T10, T15
    Square: No. 1, No. 2
    Nutdriver: 1/4", 5/16", 3/8"    		1/4", 5/16"Standard1 3/4"7"2 1/2"17/32"Chrome-Plated SteelBall DetentKlein Tools6127A4100000
     

    Static-Control Precise-Control Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Static-Control Precise-Control Screwdriver Sets.
    Protect delicate microelectronics from harmful static shocks. Also known as ESD-safe screwdrivers, these meet IEC requirements to drain static away from your workpiece before it causes damage. Precise-control screwdrivers allow for nimble, fine-tuned adjustments. Press the end of the handle with your palm to apply constant pressure while turning the body of the screwdriver with your fingertips.
    Warning: These screwdrivers conduct electricity. Do not use them near active power sources.
    No. of
    Pieces
    Includes
    Grip
    Style
    Material
    Static Control
    Rating
    Surface Resistivity
    Specs. Met
    Container
    Type
    Each
    Phillips, Slotted, Hex, and Torx
    505 3/4" Lg. Chip Lifter
    Hex Screwdrivers: 1/16", 3/32", 7/64", 1/8"
    Hex Screwdrivers: 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm
    Nutdrivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 1/8", 5/32", 3/16", 1/4"
    Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1
    Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157"
    Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20    		PlainChrome-Plated SteelStatic Dissipative1× 10^6Ω⋅cm to 1× 10^9Ω⋅cmIEC 61340-5-1Metal Stand7440A950000000
     

    Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdrivers. Screwdriver/Nutdrivers, 6 Sizes.
    Image of Product. Front orientation. Screwdrivers. Screwdriver/Nutdrivers, 11 Sizes.

    6 Sizes

    11 Sizes

    Image of Attribute. Front orientation. Screwdriver/Nutdrivers.

    Turn screws and nuts with a single tool. These screwdriver/nutdrivers come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 6-in-1 and 11-in-1 drivers.
    Premium—The best screwdrivers available, with handles that keep you comfortable during long stretches of use. They come with high-quality bits that fit snugly into fastener recesses to turn screws quickly without slipping.
    Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Bolt
    Clearance
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Mfr.
    Each
    Premium
    6Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Nutdriver: 1/4", 5/16"    		1/4", 5/16"Standard2 1/16"8 1/2"2"7/16"Chrome-Plated SteelBall DetentWiha6127A14000000
    11Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Torx: T20, T25
    Square: No. 1, No. 2
    Nutdriver: 1/4", 5/16", 3/8"    		1/4", 5/16"Standard2 1/16"8 1/4"1 13/16"9/16"Chrome-Plated SteelBall DetentWiha6127A1500000
     
    Value
    6Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Nutdriver: 1/4", 5/16"    		1/4", 5/16"Standard1 7/8"7 3/4"2 1/4"7/16"Chrome-Plated SteelBall Detent—6127A380000
     

    Voltage-Detecting Screwdriver/Nutdrivers

    Image of Product. Front orientation. Screwdrivers. Voltage-Detecting Screwdriver/Nutdrivers.
    Image of Attribute. Front orientation. Voltage-Detecting Screwdriver/Nutdrivers.

    Safely test for live circuits before driving screws and nuts. A detector snaps in and out of the handle of these screwdriver/nutdrivers to check for voltage without touching live wires. Light and sound indicators alert you when over 50 volts AC is detected. These tools come with reversible bits and shafts to turn multiple fastener sizes. Insert a bit into the shaft to drive screws or use the shaft on its own to turn nuts. All nest together to store in the body of the tool. Also known as 10-in-1 drivers.
    Value—We tested tools from dozens of manufacturers to offer near-premium quality at a fraction of the cost.
    Shaft
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Relative
    Lg.
    Bolt
    Clearance
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Bit-Holding
    Mechanism
    Each
    Value
    10Phillips: No. 1, No. 2
    Slotted: 3/16", 1/4"
    Torx: T10, T15
    Square: No. 1, No. 2
    Nutdriver: 1/4", 5/16"    		1/4", 5/16"Standard1 13/16"9"3 3/8"1 1/4"Plastic-Coated SteelBall Detent6127A13000000
     

    Precise-Control Screwdriver/Nutdriver Tool Sets

    Image of Product. Front orientation. Tool Sets. Precise-Control Screwdriver/Nutdriver Tool Sets.
    The screwdrivers and nutdrivers have a rotating end cap on the handle that lets you apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips. Also known as jewelers’ screwdrivers. These sets also include a variety of other tools.
    No. of
    Pieces
    Includes
    Container
    Type
    Each
    28Six Slotted Screwdrivers (0.025", 0.040", 0.055", 0.070", 0.080", 0.100")
    Two Phillips Screwdrivers (No. 0 and No. 1)
    Five Nutdrivers (5/64", 3/32", 7/64", 1/8", and 5/32")
    Six Hex Screwdrivers (0.028", 0.035", 0.050", 1/16", 5/64", and 3/32")
    Eight Open-End Wrenches (5/64", 3/32", 7/64", 1/8", 5/32", 3/16", 1/4", and 5/16")
    3" Long Extension    		Plastic Pouch5468A310000000

    Changeable-Shaft Precise-Control Screwdriver/Nutdriver Tool Sets

    Image of Product. Front orientation. Tool Sets. Changeable-Shaft Precise-Control Screwdriver/Nutdriver Tool Sets, 28 Pieces.
    Image of Product. Front orientation. Tool Sets. Changeable-Shaft Precise-Control Screwdriver/Nutdriver Tool Sets, 31 Pieces.

    28 Pieces

    31 Pieces

    Slide a different shaft into a handle to change tip size or drive style. These tools have a rotating end cap on the handle that lets you apply constant pressure to small fasteners while turning the body of the screwdriver with your fingertips.
    No. of
    Pieces
    Includes
    Container
    Type
    Each
    28Six Hex Screwdriver Shafts (0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2.0 mm, 2.5 mm)
    Six Slotted Screwdriver Shafts (0.025", 0.040", 0.055", 0.070", 0.080", and 0.100")
    Five Nutdriver Shafts (2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm)
    Eight Open-End Wrench Shafts (2.5 mm, 3.0 mm, 3.2 mm, 4.0 mm, 5.0 mm, 5.5 mm, 6.0 mm, and 7.0 mm)
    One Steel Handle
    Two Phillips Screwdriver Shafts (No. 000 and No. 00)    		Plastic Pouch5468A33000000
    31Two Steel Handles
    Plastic Static-Control Handle
    Four Slotted Screwdriver Shafts (0.055", 0.070", 0.080", and 0.100")
    Three Phillips Screwdriver Shafts (No. 00, No. 0, and No. 1)
    Three Nutdriver Shafts (7/64", 1/8", and 5/32")
    Six Hex Screwdriver Shafts (0.028", 0.035", 0.050", 1/16", 5/64", and 3/32")
    Four Torx Screwdriver Shafts (T5, T6, T7, and T9)
    Two Tamper-Resistant Torx Shafts (T8 and T10)
    Four Open-End Wrench Shafts (7/64", 1/8", 5/32", and 3/16")
    3/32" Diameter Awl Shaft
    3" Long Extension    		Plastic Pouch5821A4800000
    back to top