An SMC filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

An ASCO Numatics filter, regulator, and lubricator are combined to provide clean, lubricated compressed air at your required pressure.

Keep your air preparation equipment from turning on during maintenance.

Connect SMC modular filter/regulator/lubricator components with the same series number.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone.

A filter and regulator stacked together, these filter/regulators clean your compressed air and maintain the pressure. Connect them to other ARO units in the same series with joiner clamps to customize your air preparation system.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need.

A clear polyurethane bowl makes these filter/regulators chemical resistant for use with synthetic compressor oils and cleaning fluids and allows you to see inside to monitor contents.

Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air.

Extend the life of air-powered tools and equipment by removing particles and water droplets from compressed air. Connect these filters to other SMC units in the same series with joiner clamps to customize your air preparation system.

Assembled, inspected, and packaged in a clean environment, these filters come sealed in antistatic double bags.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment.

Use these filters in applications where high-quality air is critical. They remove particles down to 0.003 microns, eliminating small traces of oil vapor and its associated odor.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment. These lubricators connect to other Aventics units of the same series with joiner clamps—even if the pipe sizes are slightly different—so you can customize your air preparation system.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment.

Adjust and maintain the pressure of your compressed air. These regulators use joiner clamps to connect to other SMC units of the same series so you can customize your air preparation system.

Adjust and maintain the pressure of your compressed air.

Cleaned and double bagged in an ISO Class 3 and Fed. Spec. Class 1 clean room for protection from contamination, these regulators are suitable for use in clean rooms.

Mount these regulators to a 35 mm DIN rail with the included brackets. Use them to adjust and maintain the pressure of your compressed air.

When your double-acting cylinder sends high-speed air in reverse, a check valve inside these regulators blocks it.

Control hard-to-reach regulators without needing direct access. Instead of a knob, these regulators use a pilot signal from a regulator installed in an accessible location—often a control system—to adjust pressure remotely.

Use these regulators in sensitive applications that require constant, consistent pressure for precise force and movement. They’re often used on calibration stands in laboratories or with air-powered clamps that hold delicate items.

When precision and cleanliness are critical—such as semiconductor manufacturing and food processing—these regulators are cleaned and bagged in an ISO Class 3 clean room to prevent contamination. They deliver steady air pressure to generate precise, repeatable movement.

Use a single air supply to meet the pressure requirements of multiple applications—connect one of these manifolds to your air line, and then set a different output pressure for each station.