Connect these filter/regulators to other Aventics units of the same series with joiner clamps (sold separately) to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Joiner clamps (sold separately) create compact, airtight connections between components, even if the pipe sizes are slightly different. They come with mounting brackets to attach the filter/regulator to a wall or equipment.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

Extend the service life of air-powered tools and equipment by removing particles and water droplets from compressed air. Customize your air preparation solution by connecting these modular units to other Aventics units of the same series. Use clamps to make compact and airtight connections that you can easily swap out. These filters have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. They have a clear bowl so you can see inside to monitor its contents.

Mounting brackets (sold separately) allow you to attach the filter to a wall or equipment.

Joiner clamps (sold separately) connect the filter to another Aventics modular component with the same series number. They come with mounting brackets.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks stay connected to your pipes when you need to replace the components between them.

Also known as coalescing filters, these filters remove compressor oil to extend the service life of air-powered tools and equipment. Customize your air preparation solution by connecting these modular units to other Aventics units of the same series. Compact and airtight connections can be made and easily swapped out using clamps. These filters have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. A clear bowl lets you see inside so you can monitor its contents. As the filter clogs, a filter service indicator turns increasingly red, letting you know when the filter elements need to be replaced. To prevent clogs, install a particle filter before the oil filter.

Mounting brackets (sold separately) allow you to attach the filter to a wall or equipment.

Joiner clamps (sold separately) connect the filter to another Aventics modular component with the same series number. They come with mounting brackets.

End block sets (sold separately) let you swap out filter/regulator/lubricator components without unthreading your air line connections. These blocks stay connected to your pipes when you need to replace the components between them.

No need to buy and service two filters—these filters have a single element that removes both oil and particles. Use them to remove water droplets as well as oil and particles from compressed air to extend the service life of your air-powered tools and equipment. They have a drain that empties automatically when the system is depressurized, such as when the air is turned off at night. You can also manually empty the drain. These filters have a clear bowl so you can see inside to monitor the contents.

Mounting brackets (sold separately) allow you to attach the filter to a wall or equipment.

Add lubrication to your air supply to extend the service life of air-powered tools and equipment. These lubricators connect to other Aventics units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. You can see inside the bowl to check the oil level for refilling. Adjust the amount of lubricant in the air based on your equipment's performance. If your machine is running loudly or showing signs of wear, increase the amount; if you notice oil building up, decrease it. Install these lubricators in your air line after filters and regulators.

Mounting brackets (sold separately) allow you to attach these lubricators to a wall or equipment.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets.

Adjust and maintain the pressure of your compressed air. These regulators are relieving style, so they exhaust when the downstream pressure exceeds the set pressure.

These regulators connect to other Aventics units of the same series—even if the pipe sizes are slightly different—so you can customize your air preparation system. Their clamps (sold separately) create compact, airtight connections that are easy to swap out. Install them in your air line after filters.

Add mounting brackets to attach the regulator to a wall or your equipment.

Use joiner clamps to connect the regulator to another Aventics modular component with the same series number. These clamps come with mounting brackets.