These filter/regulator combinations come as one convenient unit that cleans the air as it regulates pressure. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Filters with a clear bowl or sight glass allow you to see inside to monitor contents.

Mounting brackets allow you to attach the filter/regulator to a wall or equipment.

A filter and regulator joined top-to-bottom, these filter/regulators fit in the same space as a filter alone. They provide clean compressed air at your required pressure. Filter has a clear bowl so you can see inside to monitor contents. Regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

End block sets (sold separately) allow you to swap out filter/regulator/lubricator components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Connect these filter/regulators to other Aventics units of the same series with joiner clamps (sold separately) to customize your air preparation system. A filter and regulator joined top-to-bottom, they provide clean, compressed air at the pressure you need. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Joiner clamps (sold separately) create compact, airtight connections between components, even if the pipe sizes are slightly different. They come with mounting brackets to attach the filter/regulator to a wall or equipment.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.

A filter and regulator stacked together, these filter/regulators clean your compressed air and maintain the pressure. They connect to other ARO units of the same series with joiner clamps (sold separately)—even if the pipe sizes are slightly different—so you can customize your air preparation system. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure. Add a safety lockout valve to prevent accidental start-ups during maintenance and comply with OSHA lockout/tagout regulations.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Joiner clamps (sold separately) create compact, airtight connections between components. These clamps come with mounting brackets to attach the filter/regulator to a wall or equipment.

End block sets (sold separately) allow you to swap out components without unthreading your air line connections. The blocks remain connected to your pipe while you replace components between them.

Knob-locking clips (sold separately) fit between the knob and the body of these filter/regulators, preventing unwanted pressure adjustments. To make changes, remove the knob and clip, then reattach the knob.

Assembled, inspected, and packaged in a clean environment, these filter/regulators come sealed in antistatic double bags. The filter and regulator are joined top-to-bottom to fit in the same space as a filter alone. They provide clean compressed air at your required pressure. The filter has a clear bowl, so you can see inside to monitor contents from every direction. The regulator is relieving style, so it exhausts when the downstream pressure exceeds the set pressure. Run a tube from the open drain port to a disposal point, such as a drain pan or waste system.

Built with a brass housing and a polyurethane bowl, these filter/regulators hold up to cleaning fluid, synthetic compressor oil, and other harsh chemicals. They provide clean, compressed air at your required pressure. The filter and regulator are stacked top-to-bottom, so they fit in the same space as a filter alone. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Bowls with an automatic drain periodically release condensate into the air, eliminating the need for manual emptying.

Mounting brackets (sold separately) allow you to attach these filter/regulators to a wall or equipment.

Push filtered, stable compressed air downstream to your system—even when your double-acting cylinder sends a rush of reverse airflow. These filter/regulators have a check valve that blocks backflow to protect the internal components of the regulator. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Stacked vertically, these filter/regulators take up no more space than a filter. Use the mounting bracket to attach them to a wall or equipment.

A two-stage filter and regulator joined top-to-bottom, these filter/regulators provide clean, compressed air at the pressure you need. Two-stage filtration is like getting two filters in one—the first stage removes large particles, while the second removes fine particles. The regulator is relieving, so it will exhaust when the downstream pressure exceeds the set pressure.

Bowls with an automatic drain periodically release condensate into the air, so there’s no need for manual emptying.

Bowls with a semi-automatic drain release their condensate whenever your system is depressurized. You can also empty the drain manually.

Mounting brackets (sold separately) allow you to attach the filter/regulator to a wall or equipment.