These assortments include pan head screws.

Drilling screws save you time and effort by drilling their own holes and fastening metal up to 0.500" thick in a single operation.

Also known as Tapcons, these screws are often used to anchor parts to concrete, block, and brick. Assortments include a drill bit.

Shoulder screws have a cylindrical shoulder under the head that allows parts to rotate around or slide along its length. They have a standard shoulder with an undersized tolerance to fit most machinery and equipment.

A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more.

These set screws have good chemical resistance.

Alloy steel set screws dig into hard surfaces for a secure hold.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. They're available in metric sizes.

Made from 18-8 stainless steel, these set screws have good chemical resistance.

Choose these set screws for their adherence to strict military standards for material and construction.

These metric 316 stainless steel set screws have excellent chemical resistance and can be used in saltwater environments.

More corrosion resistant than stainless steel, nickel alloy set screws have excellent resistance to salt water and some acids.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

Made from black-oxide alloy steel, these set screws resist corrosion in dry environments. They dig into hard surfaces for a secure hold and have serrations on the cup edge that grip the material surface to resist loosening.

These metric 18-8 stainless steel set screws are chemical resistant. They have serrations on the cup edge that grip the material surface to resist loosening.

These 18-8 stainless steel set screws are chemical resistant. They have a nylon locking patch that grips threads to resist loosening.

These alloy steel set screws have a thin edge that digs into hard surfaces for a secure hold. A nylon locking element grips threads to resist loosening.

These metric set screws are vented to allow fluid and gas to pass through.

These metric 18-8 stainless steel set screws are chemical resistant. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Made from 316 stainless steel, these set screws have excellent chemical resistance and can be used in saltwater environments. The tip makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

These metric set screws have a tip that makes good contact on flat surfaces and allows you to make frequent adjustments with minimal surface damage.

Strong and durable, these alloy steel set screws hold objects tightly against flat surfaces.

Often used to secure gears and pulleys to shafts, these metric nylon set screws are lightweight and won’t carry an electrical current.

Made from nylon, these set screws are lightweight, resist chemicals, and won’t carry an electric current.

These metric set screws have a brass tip, which is harder than nylon and silver, for a secure hold on hard surfaces. The body has a black-oxide finish to resist corrosion in dry environments.

Available in metric sizes, these screws have a tip that is harder than nylon and silver to provide a secure hold on hard surfaces. The body is 18-8 stainless steel for good chemical resistance.

Available in metric sizes, these alloy steel set screws have an extra-soft nylon tip that minimizes the damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

Made of chemical-resistant 18-8 stainless steel, these metric screws have an extra-soft nylon tip that reduces the noise, vibration, and damage that can occur from metal-on-metal contact. Use them on soft surfaces such as aluminum.

More corrosion resistant than 18-8 stainless steel set screws, these have excellent resistance to chemicals and salt water.

These metric set screws have a protruding tip that locks within a mating hole or slot to keep parts aligned. They're also known as dog-point set screws.

These 18-8 stainless steel set screws have good chemical resistance. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Turn these metric screws by hand using the hex head, or tighten them with a wrench for extra torque. With an extended tip that locks into a mating hole or slot—sometimes known as a dog point—they are often used to align and secure parts such as gears and pulley wheels.

These metric screws have a square head, so you can turn them by hand or use a wrench for more torque. Also known as half dog-point set screws, they have a protruding tip that locks within a mating hole or slot to keep parts aligned.

Stainless steel set screws have excellent corrosion resistance in most environments.

A rolling ball swivels 360° to minimize surface damage and allow for slight adjustments without loosening the screw.

Fine threads give you precise control.

Made from alloy steel, these metric set screws have a pointed tip that wedges into the contact surface for a secure hold on soft materials such as brass.

These metric 18-8 stainless steel set screws are chemical resistant. A pointed tip wedges into the contact surface for a secure hold on soft materials such as brass.

The tip is narrow to pass through threaded holes.

A low-profile flat-faced ball tip allows these metric set screw to be used in low-clearance applications.

Also known as jam set screws, these lock other screws in place, hold pins, and adjust spring tension. A black-oxide finish provides corrosion resistance in dry environments.

These kits come with everything you need to mount enclosures to round poles or beams. They clamp on to a range of pole diameters to hold enclosures securely in place.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel.