These assortments include hex head screws and hex nuts.

These assortments include button head screws.

Fasten sheet metal up to 0.200" thick.

Also known as Tapcons, these screws are often used to anchor parts to concrete, block, and brick. Assortments include a drill bit.

Set screws exert pressure at the tip to hold objects in place.

These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

SAE washers generally have a smaller ID and OD than USS washers.

Teeth bite into the joint for a tighter grip than split lock washers.

Teeth bite into surfaces for easy installation and mild vibration resistance.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.

Assortments include pliers to install external and internal rings.

Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.

Use these light duty anchors to hold 20 lbs. or less.

Dowel pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. They're slightly oversized for a tight fit.

Have different sizes and lengths of spacers ready for a variety of jobs.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

Kits include helical inserts, a tap, and an installation tool.

A closed-end tap, drill bit, and installation bit are included with these inserts.

Assortments include various sizes of tapping inserts for hardwood.