Use these connectors in general purpose residential and commercial applications.

A good fit for tight spaces, these are smaller than standard straight-blade plugs. Also known as NEMA midget plugs.

Create a streamlined appearance—the flat face lies flush with your wall plate.

Eliminate the need for wire stripping; snap-on terminals pierce the wire insulation and grip the wire securely. Access the wire connection by opening the hinged housing.

Visually confirm that connectors have power; they have an indicating light that is visible from any angle.

Protect computers and other sensitive equipment from electromagnetic interference (EMI). Also known as isolated ground receptacles.

Suitable for use outdoors, receptacles can be used in wet and damp environments. They keep personnel safe from electric shock by adding ground fault protection.

Receptacles protect sensitive equipment from electromagnetic interference (EMI) and spikes in voltage.

Add a fuse to protect equipment from current overload.

Reduce the likelihood of an electrical fire. Receptacles interrupt power when an electric arc is detected.

Rated NEMA 6P and 13, IP66, and IP69K when mated, connectors withstand oil/coolant spraying, high-pressure, high-temperature washdowns, and are corrosion resistant so they can be used in marine environments.

Also known as hospital-grade connectors, these have an extra-tight fit when mated to remain secure in high-vibration environments.

Keep personnel safe from electric shock by adding ground fault protection. These receptacles have an extra-tight fit when mated with plugs to withstand high vibration. Also known as hospital grade receptacles.

A rubber housing protects these connectors from damage caused by drops and impact.

Use connectors where ignitable gas and dust may be present. They are UL listed for Class I, Division 1 and 2, Groups C and D; Class II, Division 1 and 2, Groups F and G; and Class III hazardous environments.

Snap these receptacles into a cutout on an electrical panel—no screws or clips needed.

Prevent damage to electronic equipment caused by spikes in current. Mount these receptacles to DIN rail.

Pair these connectors with standard IEC power cords to bring power into or out of your electronic devices.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.

With a built-in switch, these connectors run power to appliances, power supplies, and other electronic devices while also filtering damaging EMI (electromagnetic interference).

Power electronics in damp environments while protecting them from electromagnetic interference.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation.

Power hydraulic and air-powered valves, motors, pumps, and pressure switches.

Power up mobile devices and other electronics.

All cords have a country-specific plug on one end and an IEC socket on the other end.

Create a vibration-resistant connection—the socket on these cords locks onto any male receptacle and will not detach until manually unlocked.

The shielding blocks signal interference from nearby equipment and devices.

These self-coiling cords stretch to full length and then return to their retracted length for tangle-free storage.

After a power failure, these cords must be manually reset, preventing unexpected equipment startup.

Plug these cords into fans that have quick-disconnect terminals.

Couple these adapters with a cord that matches your outlet and length requirements to run DC-powered electronics.

To run DC-powered lab and medical equipment from your outlet, add a power cord with the plug style and length you need. These adapters meet strict IEC, UL, or ANSI/AAMI standards for use with medical devices.

Power devices that require less than 120 volts AC.

Use these cords with hydraulic and air-powered valves, motors, pumps, and pressure switches. They have a solenoid valve socket on one end and an M12 threaded plug on the other.

Change the connection style between an outlet and your equipment.

Use these cords where ignitable gas and dust may be present. They're CSA certified for Class I, Divisions 1 and 2, Groups B, C, and D; and Class II, Divisions 1 and 2, Groups F and G hazardous environments.

Run these cords through high-traffic areas that are dirty and greasy. They have a thick insulation that resists water, oil, and chemicals, and protects against abrasion.

The insulation resists water, oil, and chemicals, so these cords withstand dirty and greasy environments.

Power multiple devices with one extension cord.

Thick insulation protects the internal wires of these cords, so they can be used in high-traffic areas and over rough surfaces.

A locking lever on the female socket prevents your device from disconnecting.

Also known as hospital-grade cords, these have extra-tight connections to prevent them from detaching. The connectors are marked with a green dot.

Attach these splitters to an extension cord to power multiple devices from one cord.

Save energy by automatically turning off unused outlets. The master outlet controls five outlets and shuts off power to the other outlets when a device plugged into the master is turned off.

The power switch to these outlet strips is on a 44" long cord, so you can control power even when the strips are in hard to reach places, such as under a desk.

Keep personnel safe from electric shock with ground fault protection.

With a rubber housing, these outlet strips withstand drops and other impact.

Connect multiple devices from a single outlet.

These curved outlet strips clamp onto a pole or table leg.

Install these extra-long strips onto the frame of an electrical cabinet.

Mount these strips into standard 19" wide electronics racks and enclosures.

Change a turn-lock to a straight-blade connection, or a straight-blade to a turn-lock connection.

Power devices that have a straight-blade connection from a vehicle outlet.