This high-strength material is mildly magnetic and has excellent corrosion resistance. Install these rivets in countersunk holes and the angled head sits flush with the material's surface. They join material when you only have access to one side.

The combined thickness of material must fall within the rivet's material thickness range. Shear strength is the amount of force it takes to break a rivet from the side, and tensile strength is the amount of pull a rivet can withstand without breaking. Joint strength is also affected by rivet spacing and hole size.

A blind rivet tool (sold separately) with a nosepiece that matches the rivet's diameter is required for installation.

For technical drawings and 3-D models, click on a part number.

Thread these fittings into motors, bearings, engine blocks, and other machinery to create a lubrication point. They’re also known as hydraulic grease fittings.

400 nickel fittings are the most corrosion resistant and can be used in caustic environments, such as those involving salt water, sulfuric acid, and alkalies.

Fittings with a check valve prevent grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.

PTF-SAE and NPTF (Dryseal) threads are compatible with NPT threads. SAE-LT threads are tapered but designed to be installed into a 1/4"-28 straight-thread UNF hole.

For technical drawings and 3-D models, click on a part number.

Often used on earth movers, mining equipment, and other heavy machinery, these fittings have a T-shaped top that holds the dispensing tip in place so it won’t pop off when adding grease. They're best for machinery requiring high volumes of grease because they let more grease pass through than standard grease fittings, thanks to a larger opening. An integral check valve prevents grease from leaking when pressure causes backward flow. The valve stays closed when not in use to keep out dirt and other contaminants.

400 nickel fittings are the most corrosion resistant and can be used in caustic environments, such as those involving salt water, sulfuric acid, and alkalies.

PTF-SAE and NPTF (Dryseal) threads are compatible with NPT threads.

For technical drawings and 3-D models, click on a part number.