Protect harsh environment M12 connectors when not in use.

The cable-entry side has heat-shrinkable polyolefin with an adhesive lining. These are also known as cable-entry seals.

Minimize leaks in your line—these fittings have a single barb that creates a smooth clamping surface for extra-tight connections.

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

Joints are for one-way flow and are brass for good corrosion resistance.

Use these couplings at pressures up to 7,200 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with International Standard ISO Minimal-Spill-shape plugs and sockets.

Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

Made from Grade 5 steel, these inch-sized coupling nuts are suitable for most applications.

These coupling nuts have good chemical resistance.

One-third the weight of steel, aluminum coupling nuts resist corrosion in wet environments.

Plastic coupling nuts are chemical resistant, nonconductive, and lightweight.

Stainless steel coupling nuts have excellent corrosion resistance in most environments.

You can weld these nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to uncoated steel surfaces.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Projections on the base concentrate the weld and provide room for heat to dissipate.

These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.

Use these tube-end weld nuts with left-hand threaded fasteners.

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through.

Use these barrels with a screw you already have or pair with a different type of screw to create a custom fastener. They're zinc plated to resist corrosion in wet environments.

These binding barrels and screws have good chemical resistance.

You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).

These steel studs are zinc plated to resist corrosion in wet environments.

Also known as hood pins, these studs have a cotter pin lodged through a drilled hole in the unthreaded portion for light duty holding, such as securing access panels and locking other fasteners.

These steel studs are zinc plated to resist corrosion in wet environments.

Weld these studs to uncoated steel surfaces.

Add a stud to thin material when you only have access to one side.

The nipple doesn't stick out, so these fittings fit in tight spaces and won't be damaged if something knocks into them.

When the size or thread type of a fitting doesn't match an existing opening, use these adapters to make the connection.

A black-oxide finish provides mild corrosion resistance.

These stainless steel anchor studs offer excellent corrosion resistance.